Hella 118 TTG - NOS Driving lights lenses - multiple sets

[911_2.2T]

In search for parts for my cars I stumbled onto a box of Hella TTG Driving light lenses.
A great opportunity if you are in the process of restoring your original driving lights, or if you have a broken lens.
These lenses were used several years and approval markings varied over the years.
I have 3 sets that are matched pairs with one version of the markings (1xE + 1xA) and 1 set with another varriation of the markings (2xE + 1xA).
The 2 lenses that were 'left over' were not a 100% match on the markings (one of both), so I'm willing to split this one up or sell as a set at a reduced price.
For the 100% matched pairs I want $250 a set of 2 lenses shipped, the unmatched set of 2 lenses can go for $225 shipped.

[911_2.2T]

One matched set sold, three matched sets available

[911_2.2T]

Two matched sets sold, two matched sets available

[70SATMan]

For those looking to buy lenses and "restore their lights, please make sure your lights are the early type with separate lense, seal and reflector. Hella changed their production method by epoxying the lenses to the reflectors, removing the seal which makes them a "sealed beam like" assembly. One cannot remove those lenses without bunging up the reflector...I've tried.

This change took place during the longhood years so, I've seen both types supplied as "factory".

[911_2.2T]

There is 2 ways to get around this.
If your reflector needs resilvering, soak them in glue weakener to loosen the epoxy, this will also solve off the silver of the mirror, but will save you your sand blasted lenses to keep as spare.
If your mirror is fine, take a safety hammer and break the lens, pull and pry of the old lens pieces and clean the edge before you glue in the new lens.

[911_2.2T]

Three identical sets sold, only one identical set available with 2xE and 1xA markings.
Mismatched set is also available

[911_2.2T]

Bump for the last matching set