Results 1 to 2 of 2

Thread: Solex float bowl gasket help

  1. #1

    Solex float bowl gasket help

    My early 911 is leaking gas around the carb float bowl. Is a gasket sealer recommended? What type?
    Thank you.

  2. #2
    Senior Member
    Join Date
    Apr 2012
    Location
    Simi Valley Ca
    Posts
    501
    No sealer recommended. Sounds like the parts are warped. Recently rebuilt 2 Zenith 32NDIX carbs off a 356C. Removed anything that stuck above the seating plane and sanded smooth. I had a large, very flat piece of anodized Aluminum, got some 200/300 wet or dry sandpaper, sprayed with WD40 and sanded till they were flat. Took me over an hour for both carbs, 3 places each carb. No more leaks. Of course you have to do both sides, which means both carbs have to come off the car.
    When you bolt the tops back on, maybe a small drop of Blue Loctite, and don't use much torque. Just snug.
    Bob B

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.