FS: Early Pistons and Cylinders, Sets, Partials, etc.

[greggearhead]

Lots of Pistons and cylinders from huge parts stash - if there is an error in my listing, please let me know, I'm going from my knowledge and the markings and notes from previous owner (who was fastidious, but mistakes happen).

Partial set of 1967/68 911 E - 4 cylinders, 6 pistons. Pistons are 79.95mm - some are marked zero, some are marked +1, but measure the same?

$500




















Used Complete set of 1972 911T Pistons and Cylinders. Bore measures 83.75mm. Pistons fell a little loose in the bore - can rock them a little. $900

[greggearhead]

1974 2.7L Pistons and Cylinder set, with the CIS dome - Kolbenschmidt ~89.8mm bore $700

[greggearhead]

Another set of 2.7 CIS pistons and cylinders - $700 89.8mm bore Only photo'ed one piston and cylinder, but a complete set









Partial set of 2.7 Pistons/Cylinders. 3 Cylinders, 4 pistons. Measure about 89.8mm bore. $300

[greggearhead]

Set of complete 1975 911S - MAHLE 2.7 CIS pistons and cylinders - measure about 89.8mm Box is marked "very nice" $800

[greggearhead]

Partial set of 2.0L 79.85mm pistons/cylinders Think they are E's, but not 100% (5 cylinders, 4 pistons) $500








84mm so 2.4L Partial set - 3 pistons and Cylinders, look like E's - $200

[greggearhead]

All still available - feel free to make offers on this stuff. Happy to combine for an engine shop, etc.

[greggearhead]

Still available.

[greggearhead]

Bump for offers or a package deal for an engine builder, etc.

[greggearhead]

All reasonable offers considered.

[greggearhead]

2.7 Mahles sold - make an offer on any or all of the rest!