SWB Brake hubs front for ventilated discs Wanted, also wide L rear calipers SWB

[91167coupe]

I am searching the right hubs for front ventilated discs for my -67 912, I have calipers for ventilated discs. Also wanted wide L calipers for the rear....

[rvdv]

I have a pair but don't know if they are for solid or vented rotors, if you can give me dimensions I can measure them.
Rudy

[tom1394racing]

I have SWB front hubs for vented rotors. PM me with your email for details.

[Slcarr]

I have complete front and rear S brakes from 1967 S. Everything, struts, front calipers and rotors, hubs and dust shields. On the rear control arms, drive flange, hub,dust shields, 48mm rear calipers, rotors. If interested PM with your email.

[91167coupe]

Hello
Thanks for your answer, I actually only need the rear calipers. I guess you do not want to splitt the set?

[tom1394racing]

I have a few sets of the SWB vented rotor front hubs. PM me for details.

[1968DT]

I have a few sets of the SWB vented rotor front hubs. PM me for details.

What are the differences between the 67 and 68 swb hubs? Are there two types of 67 hubs, vented & non vented? While only one type on swb 68? Thanks, very interested in this subject.

Dan

[tom1394racing]

Here is a pic showing the variations of front hubs

[1968DT]

Here is a pic showing the variations of front hubs

Great pics, thanks. Looks like 67 vented hubs are quite unique and therefore pretty rare, and 68 on go both ways (the only difference is the deeper brake shield?) Stud's et al the same?

Thanks!

[91167coupe]

Acording to the PET there is only 2 types hubs for early 911/912. 65-66 and 67-. Looks like vented and nonvented discks use the same hub on the -67 cars and onwards.

Anyone knows which caliper fit the 2.25" bracet on the rear SWB? I guess Porsche used an ATE caliper in the system when developing the car?

Pelican have a solution for rear vented discs on SWB but it is rather expensive...