For sale is set of cyl & pistons for 2,0
Iron cyl so 2,0 or also for 914/6
set of new deves aftermarket pinton ring set
asking 500 eur for set + shipping (approx 55 eur)
WP_20160525_013.jpg
and set of mahle cyl and mahle pistons from early (old type of piston)
all from same set
asking 600 eur for set +shipping (aprox 55 eur)
WP_20160525_015.jpgWP_20160525_016.jpg
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
Hallo,
my name is Anke and I´m interested in your Mahle cylinder and pistons. Unfortunately the last set I bought at ebay was scrab. I need parts for restoration of a 901/01 and a 901/05. Please tell me if the parts would fit. If the parts are really useable please contact me. If the condition is not very good, please sell it to the next member.
I live in Germany.
Wish you a nice week.
Kind regards.
zech@medeco-bonn.de
Anke
Hallo Anke
I measure the pistons and barrels next weekend
and put the measurement here
Have six set total for 2,0 cars
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
Here is some measurements from the biral ones
All pistons between 79,88-79,92 ( wear limit 790,845) Mahle 80v65
cylinders 80,05-80,065 ( wear limit 80,1)
the steel ones still under evaluation
wear out limit for 80 mm cyl is 80,10 fo oversize bore
wear out limit for piston is 0,1 wear form original dim, in this case 79,95
this info from rebuilt book of )11 engines by Bruce Andersson
so with new rings can be used for years or if want can be rebored for 80,50 or 81,00 mm
WP_20160605_001.jpg
Last edited by phoffren; 06-05-2016 at 09:52 AM.
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
now also T set measured
all cyl bethween 79,94-79,97 mm bore
pistons between 79,90-79,94 mm (mahle 80v69)
new set of rings !
need cleaning and would be nice set for 2,0
WP_20160605_004.jpg
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
someone needing decent used sets?
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
Posting Permissions
Reply With Quote