FS: SWB 911S Front Brake Backing Plate Mount, for Ventilated Rotor

[JimmyT]

These mounts replace:

PET 67-68 911 Fig 6-02-00, #06 901.351.085.13 Retaining bracket (backing plate mount, 911S/L) Qty: 2

They are employed to mount:

PET 67-68 911 Fig 6-02-00, #09) 901.351.801.16 Protective plate, left Qty: 1 NLA
PET 67-68 911 Fig 6-02-00, #09) 901.351.802.14 Protective plate, right Qty: 1 NLA

using:

PET 67-68 911 Fig 6-02-00, #07 901.351.481.11 Tab washer (Lock plate) Qty: 2
PET 67-68 911 Fig 6-02-00, #08 900.075.041.02 Hex bolt, M10x25 Qty: 4
PET 67-68 911 Fig 6-02-00, #10 N 010 235 3 Hex bolt, M8x10 Qty: 6
PET 67-68 911 Fig 6-02-00, #11 N 012 241 1 Spring washer, B8 DIN 137 Qty: 6

Mount:

Material: Mild steel, 1018, 0.050"
Finish: Bead-blasted, Zinc II (Gold) plated
Weight: 61.29 grams

The price is $35.40 each.
USPS flat rate shipping in the US is $6.80

The deformable lock plates (#07) are also available for $11.52 each.

Material: Stainless steel, 304, 0.050"
Finish: Glass bead-blasted
Weight: 9.43 grams

911FtBrakeBackingPlateMount_04_800x600.jpg	911_FtBrakeBackingPlate,Mount,Exploded_800x600.jpg
911FtBrakeBackingPlateMount+LockTab_04_800x600.jpg	PET,65-68_911,Fig6-2,#06,Brakes,Ft,BackingPlateMount_800x600.jpg

[1968DT]

Whoohoo!!!!

Awesome reproduction. I'll take a few.

Thank you so much for taking the time and effort to make these. So very hard to find these two year only parts!

"You da man"!!!!!

++++++++++++++

[Larryg57]

PM sent,

Larry

[tcsracing1]

so the 67S and 68S had the single tab mount for backing plates? 2 year only part?

notice how the illustration shows a two tab mount..... this is what made it hard to figure out what was corret for the vented rotor S model.

I had to pull a set off a car at a wrecking yard. complete with clean backing plates.

[JimmyT]

Sorry that I confused you by including the factory Parts Book figure.
I updated the figure to reflect the correct part which was originally missing.
Congratulations on solving this portion of your quest!

PET,65-68_911,Fig6-2,#06,Brakes,Ft,BackingPlateMount+VentedMount#6)_800x600.jpg

[tcsracing1]

what are the backing plates trading for?

[Slcarr]

I do have a pair of 67 S 3 bolt front brake shields with the 3 bolt bracket. If interested email me threw user name.

[tcsracing1]

I do have a pair of 67 S 3 bolt front brake shields with the 3 bolt bracket. If interested email me threw user name.

any idea what they are worth?
I came across two sets.

[1968DT]

If I had two sets I would send them out to be replated. Buy the brackets from JimmyT, if you don't have them, and sell them quickly as a nice package because there are probably reproduction plates in the pipeline. My guesstimate is $500.00 per set.

[tcsracing1]

If I had two sets I would send them out to be replated. Buy the brackets from JimmyT, if you don't have them, and sell them quickly as a nice package because there are probably reproduction plates in the pipeline. My guesstimate is $500.00 per set.

It is backing plates, callipers and all the brackets.