70-S front oil cooler lines - need rubber grommet part number..

[mac73s]

I can't seem to locate a PN or illustration for the large rubber grommets where the inside rocker oil cooler lines run through the front fender closing panel and into/through the rear inner quarter/engine bay. My usual 'go to' Porsche parts guys seems to be having the same challenge. Can anyone help? Thank you.

[JimmyT]

PET 1965 356, Fig. 105-10, #07 999.702.033.50 Rubber sleeve Qty: 1 NLA

[1968DT]

I've had good luck sourcing grommets from Del City if you can't find it.

Good luck.

[stretch]

i used four of these for my ST build. http://www.ebay.de/itm/Porsche-911-S...UAAOSw~gRVjo67

They do fit over the lines but they are a better fit if you cut them open like the originals. The price is a joke and i think this is a grommet that is used somewhere else on the 911 as i found a used one in my stash. They sell some nice NLA parts for the S cooler system.

Dave



[Alan.uk]

I have been meaning to having these re made for a many years, so reading this has reminded me to get back side in gear. The one in the link previously mentioned does not look like the originals have here.

We have 1x 69S and 3x 2.2Ss to restore over the coming months so I need to get these made as besides these cars I know others also need them.

Alan

[stretch]

Correct Alan, these are a compromise. They are a good fit on the pipe and the body.

[Dswanny1]

Alan, if you make them Im in for set of 4


dan

[mac73s]

Thank you all...some great leads.