911 Left + Right Rear Wheel House Panel 1965/66

[Michael Winters]

Hello,

I am looking for a correct right and left rear wheel house panel.
This is for the restoration of my BY65 MY66 911.
The panel has the heating tubes going under the torsion hole.
See picture below.

Schermafbeelding 2017-01-25 om 21.18.49.jpg

I need this for my restoration since the car, has been provided by wheel house panels for the heating tubes going above the torsion hole.
These body panels are bulkier above the hole

Thanks,

[moito]

hi michael

me again-----this is what i have but not a steal.
http://www.early911sregistry.org/for...904#post826904

f.

[Soterik]

I have a lot of different wheel housings, all NOS. I have some of each side. I've sold a couple, and not sure of what's left, but I had a lot of duplicates so I could have what you need.

DSC_0149.jpgDSC_0150.jpgDSC_0151.jpgDSC_0152.jpg

[Michael Winters]

E.

Thanks for your reply.
If you have any time could you check what you still got of these wheel housings with heating tube below type (NOS and duplicates)?
Today going to my body guy and telling him we have the wrong type (heating tube above type) on the car (left and right).
Franz, is thinking that the correct heating tubes are still there (below) behind wrong wheel housings (above).
My body guy is going to do a test on Franz' advice/method.

Thanks

I have a lot of different wheel housings, all NOS. I have some of each side. I've sold a couple, and not sure of what's left, but I had a lot of duplicates so I could have what you need.

DSC_0149.jpgDSC_0150.jpgDSC_0151.jpgDSC_0152.jpg

[Michael Winters]

bump........

[moito]

michael to answer your question of a different thread --- below type up to vin 305795--thats early my67

[Michael Winters]

Thanks Franz!
Eric also already gave me this full covering answer.
Now the only thing is finding these ....