Results 1 to 2 of 2

Thread: FS: 70.4mm Crankshaft out of 1976 930 Turbo

  1. #1
    Senior Member greggearhead's Avatar
    Join Date
    Feb 2009
    Location
    Colorado Springs, CO
    Posts
    3,850

    FS: 70.4mm Crankshaft out of 1976 930 Turbo

    EDIT - SOLD

    This is a crank that needs a .010 grind according to my machinist, but was straight within 3 thou - which is a lot better than most 911 cranks I've had checked.

    This crank is out of a 1976 930, so it is the 3.0 Turbo with 70.4mm stroke (same as 2.4, 2.7, 3.0 Carrera and SC).

    $500








    Last edited by greggearhead; 09-13-2017 at 10:04 AM.

  2. #2
    Senior Member greggearhead's Avatar
    Join Date
    Feb 2009
    Location
    Colorado Springs, CO
    Posts
    3,850
    Crank has been magnafluxed by Rocky Mountain Machine. Checks out good.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.