If anyone can post a picture of the RHD version of the front suspension protection plate it would be much appreciated (in situ ok but need to see details of rear edge)- we have to covert a LHD one. year is 72. Pictured LHD:
If anyone can post a picture of the RHD version of the front suspension protection plate it would be much appreciated (in situ ok but need to see details of rear edge)- we have to covert a LHD one. year is 72. Pictured LHD:
Membership #3255
301022
revivem.co.nz
Ivan,
A customer of ours has a 72 in at the body shop. Ive been meaning to check on progress so ill try and snap a few pics if possible.
Cheers
Reuben
Great thanks. (PM sent)
Membership #3255
301022
revivem.co.nz
I have started getting these made. The original I have is in very rough shape but the magic of my fabricator will prevail. I believe he has attempted both a straight fabrication and also a lhd conversation.
If you would like one from the first batch let me know. He is not quick.
Regards
Mike
RS#1551(sold)
67S
73E (home after 25 years) and sold again
Early S reg. #681
hi mike i would be interested in one .
thanks
Mike include me in the first batch..... had my original cleaned up in the last couple of years but would be best to refresh - Cheers Nick D
Nick D - Run Flat
1973 RHD 911 Carrera RS #0358 - Fun Car
2016 Cayenne Diesel - Tow Car
2017 Macan S - Better Half's Car
1955 356 Speedster SOLD
1976 911 2.7 SOLD
2006 Cayman S SOLD
2006 Cayenne S SOLD
2008 Carrera S F77 SOLD
2011 Cayenne S TOTALLED (T-Boned but kept us safe)
2015 Macan S SOLD
2015 GT3 - Track Car
2016 Cayenne SOLD
2016 Cayenne GTS TOTALLED (Bloody big deer)
Still looking for 1st Edition Carrera RS book #358.
Life is way too short to drive boring cars.
There is definitely a market, I would buy two
Yep, I'd take one as well, thanks.
Julian
Victoria Australia
TYP 901 Registery
Early S Registry Member #2874
Our body shop is well equipped with good fabricators who can make from scratch or convert - we just dont have the original to copy - it less work to convert the lhd we have of course - more or less just another lump on the back from what I can see
Membership #3255
301022
revivem.co.nz
Just saw this thread as the body man who did all my work on the ST is fabricating a correct RHD one from an excellent template that I borrowed.
We are making one for the plastic 85 litre tank but it is the same as STD one but with a semi circle plate welded on
The LHD RS extension in the one in this pic is not how the RS was originally is was much more semi circle.
We have cut away the 1/4 of the plate that does not match the LHD version and fabricated the RHD bit. It is a dip rather than a raised piece on the LHD version
I would put into production but if your nearly there Mike let me know and I won't bother as no point both of us doing it and I certainly think there is a big
market for them as most car have either lost theirs or smashed them to bits over the years.
Last edited by BOYER73S; 03-19-2018 at 10:11 PM.
Clyde Boyer
1973 2.4E Coupe RHD Aussie 5 speed
1973 2.4E Coupe RHD Aussie 5 speed my first ever 911 (1995)
Early S Registry Member #294
First Aussie R Gruppe Member #366
TYP 901 Register Inc #6