I would need one 84P13 piston
used but in tolerance
one of mine is out of tolerance and I need one to replace
also set of new piston rings is needed
offer PM
I would need one 84P13 piston
used but in tolerance
one of mine is out of tolerance and I need one to replace
also set of new piston rings is needed
offer PM
Last edited by phoffren; 11-04-2017 at 07:21 AM. Reason: missing word
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
bump
still looking single piston
could use also 3 cyl mine has some wear
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
still need piston and cyls
used or new 84P13 (87,5mm) and mahle cyls
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
coming winter bump,
block is assembled so these start to come in question
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
January bump
pistons look sorted now but need 3 cylinder
mine seems to be out of possible to repair( possible but with high cost)
thinking that also 86.7mm cyls be a base and with bore up 87.5 and then replate them
Would be interesting to hear if someone has done it how they work
So looking either straight usable 87.5mm cyl or 86,7 well used but not with broken con rod marks on it
offer to my pm
thanks
pekka
911 S -72 Targa
911 S/T -70 Gulf- replica
930 -88 Coupe no sunroof, mint
911 S -75 Targa /cabriolet
911 T -71 Targa project
911 T -70 Targa project
928 S4 with XX8 option -91
"Super" -59 Schlepper
+some water cooled 924&928&944&968&958&997series
Sold and gone only to remember
911 2.9 RC -70, 911 3.2 cab -89, 911 T -70, 928 S4 -90, 944 -84, 911 T-71, 356 B -60, 911 -65, 986 3,2S -01, 955 3,2 -04, 957tbo -08
Early S Registry # 3253
PCF # 710
Posting Permissions
Reply With Quote