Results 1 to 2 of 2

Thread: MFI injector

  1. #1

    MFI injector

    Hi

    I'm planning to change all MFI injectors on my 911 E-73, after I have discuss with Bosch that you cannot repair or adjust injectors who are 45years old. How to change just bring them out and put the new in place
    Thankful for advise if you have done this operation

  2. #2
    Unscrew the old, make sure you get the copper washer out, it may come out with injector or it may stay in the head. You can reuse them, put some anti-seize on the threads and install the new ones. Also put some anti-seize on the fuel line threads. You should have old ones tested, they may not all be bad, don't just throw them out.
    Early S Registry member #90
    R Gruppe member #138
    Fort Worth Tx.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.