Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: FS: 911 Door Hinge Bolt, 999.509.001.02

  1. 06-25-2018, 12:07 PM #1
    JimmyT
    JimmyT is offline
    Senior Member
    Join Date
    Jan 2005
    Posts
    556

    FS: 911 Door Hinge Bolt, 999.509.001.02

    These bolts were used from '66-Mid '72. They have the correct 12 point, triple square, XZN recess and replace the NLA:
    WET '65-68 911 Fig 8/6 #3) 999.509.001.02 Cheese-head screw, M08x1.0x15 Qty: 12
    Door hinge bolts '72): 900.075.085.02 Hexagon-head bolt, M8x20.

    Material: Titanium, Gr 5 (6AL-4V)
    Finish: As machined
    Weight: 5.72 grams (4.36 grams lighter than OEM)

    They come with the choice of several washers (#7) :
    * 1 Washer, lock, split for 'standard' 911
    * 1 Washer, lock, split for cap screws (non-OEM, but I think they look cleaner)
    * 1 Washer, lock, Toothed for other models
    * 1 Washer, lock, Belleville/Schnorr for believers

    These bolts require an M8 XZN socket, preferably 3/8" drive, impact rated. Non-impact socket sets can be found cheaply on eBay (US seller, lifetime warranty). They can also used on the door striker bolts. An impact wrench, impact hammer, or 24" breaker bar will aid in bolt removal.

    The bolt's price is $5.33 each ($31.98 per door set of 6, $63.96 per car set of 12).
    Shipping within the US is by USPS First Class Mail (varies by destination, ~$5.00). Priority Mail is available for $7.20 (As of 2023 it is $10.20!).

    911DoorHingeBolts(XZN)_03_800x600.jpg 911_65-69_Fig8-04-00,#2-#7_800x600.jpg
    911_DoorHingeBolt_Washers_800x600.jpg XZN=TripleSquareSplineBitSocketSet,1-4in(4,5,6),3-8in(8,9,10,14),1-2in(16,18)_Annotated.jpg

    Other parts available:
    P290B Door Hinge Pin Tool
    911 Ignition Bezel, Small
    911 Grill,Nut
    P290B_911DoorPinRemover_12_800x600.jpg 911IgnitionSwitchBezel,Early_03_800x600.jpg 65-69_911GrillNut_12_800x600.jpg

    Key Words: XZN, 99950900102, N 0147074
    Last edited by JimmyT; 04-24-2023 at 09:18 AM.
    Reply With Quote Reply With Quote
  2. 06-26-2018, 05:35 AM #2
    dirk07
    dirk07 is offline
    Senior Member dirk07's Avatar
    Join Date
    Apr 2016
    Location
    Stuttgart, Germany
    Posts
    3,349
    Aren't they used until March/April 1972?
    Reply With Quote Reply With Quote
  3. 06-26-2018, 05:36 AM #3
    moito
    moito is offline
    Senior Member moito's Avatar
    Join Date
    May 2013
    Location
    AUSTRIA (tu felix)
    Posts
    6,714
    Quote Originally Posted by dirk07 View Post
    Aren't they used until March/April 1972?
    yes changed to hex during my72 not sure what month
    membership#2778

    300096
    http://www.early911sregistry.org/for...?117979-300096
    https://www.youtube.com/watch?v=owI1QBHhbS0
    https://www.youtube.com/watch?v=i05gKtHWjGY
    Reply With Quote Reply With Quote
  4. 10-25-2021, 07:46 AM #4
    mgageoff
    mgageoff is offline
    Junior Member
    Join Date
    Jan 2012
    Posts
    1
    good morning for the 1970 door screws can you ship to me in Canada? L6J5R1
    thank you
    Reply With Quote Reply With Quote
  5. 10-25-2021, 08:24 AM #5
    JimmyT
    JimmyT is offline
    Senior Member
    Join Date
    Jan 2005
    Posts
    556
    Hello mgageoff,

    Yes. Shipment costs to Canada by USPS International Mail $14.25 and USPS Priority International Mail $28.50.

    Quote Originally Posted by mgageoff View Post
    good morning for the 1970 door screws can you ship to me in Canada? L6J5R1
    thank you
    Last edited by JimmyT; 10-31-2021 at 08:16 AM.
    Reply With Quote Reply With Quote
  6. 10-25-2021, 09:09 AM #6
    John Straub
    John Straub is offline
    Vintageracer John Straub's Avatar
    Join Date
    Sep 2006
    Location
    La Quinta
    Posts
    3,184
    How much are the grill nuts?

    John
    1959 356 Coupe, 1600 Super, sold
    1960 356 Roaster, race car, SCCA, sold
    1960 356 Roadster, show car, sold.
    1962 356 Cab, show car, sold.
    1965 911 #301111, Red Book Vol 1 "Cover Car," owned 54 years.
    1967 911 #307347, bare-bones, some road wear, a little surface rust, and a few dents..., owned 14 years.
    1970 914/6GT, (Sold - ran the last three Rennsports)owned 30 years.


    Photography Site: JohnStraubImageWorks.com

    Registry #983
    R Gruppe #741
    Reply With Quote Reply With Quote
  7. 10-26-2021, 08:17 AM #7
    JimmyT
    JimmyT is offline
    Senior Member
    Join Date
    Jan 2005
    Posts
    556
    Hi John,

    The grill nuts referenced in the first post are $4.94 each.

    65-69_911GrillNut_12_800x600.jpg

    Quote Originally Posted by John Straub View Post
    How much are the grill nuts?

    John
    Reply With Quote Reply With Quote
  8. 07-04-2022, 06:15 AM #8
    Bengel
    Bengel is offline
    Junior Member
    Join Date
    Jun 2012
    Location
    Corry, PA USA
    Posts
    5
    I would like a set, no washers needed as I plan to use Schnorr. Are these 15mm for 70 911? I would like a set of 12. Karl at www.thoroughbredmotorsports.com
    Reply With Quote Reply With Quote
  9. 03-21-2023, 04:08 AM #9
    Claudecot3
    Claudecot3 is offline
    Junior Member
    Join Date
    Oct 2022
    Posts
    26
    Hi Jimmy,

    Are these bolts still available? Are these 15mm or 20mm thread lenght?
    If these are 20mm (hopefully for me) I would need 2 complete car sets.
    Can you contact me by email please, I can't PM as I am "too young" in this forum.
    claude . cot3 @ gmail . com

    Thank you
    Reply With Quote Reply With Quote
  10. 03-21-2023, 06:58 AM #10
    JimmyT
    JimmyT is offline
    Senior Member
    Join Date
    Jan 2005
    Posts
    556
    Quote Originally Posted by Claudecot3 View Post
    Hi Jimmy,

    Are these bolts still available? Are these 15mm or 20mm thread lenght?
    If these are 20mm (hopefully for me) I would need 2 complete car sets.
    Can you contact me by email please, I can't PM as I am "too young" in this forum.
    claude . cot3 @ gmail . com

    Thank you
    Hi Claude,
    These parts are still available. They are identical to the OEM bolts, WET '65-68 911 Fig 8/6 #3) 999.509.001.02 Cheese-head screw, M08x1.0x15 Qty: 12.
    There were some longer 20mm grip length bolts used briefly before they were changed but I don't know the part number and don't produce them.
    Good luck in your search.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules


Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.