Ok, my engine is back in my 69S, but I知 not getting enough fuel pressure to the injection pump. I知 getting less than 1lb of pressure out of the fuel pump.
A little background. The car sat for 30 years and the fuel pump was completely froze up. I took the head off and flooded the armature with WD40 and got everything loosened up. Seems to be spinning freely when 12V applied. I put new O rings in and it is not leaking. Fuel flows freely from tank to pump and from pump inlet (bottom nipple) and out supply nipple (middle). I thought perhaps I clocked it wrong when I reassembled it, but I have tested it in all four positions with no improvement.
This is very frustrating, as this is all that is keeping the car from driving in 30 years, and my first time to ever drive it!
Any ideas before I give up and buy a new pump, which at $800+ is not an enduring prospect!
Thanks for any advice or solutions.