Results 1 to 9 of 9

Thread: FS: Tools, lots of them

  1. #1

    FS: Tools, lots of them

    Updated Oct26- Reorganized parts list. Several SSS wrenches and plug wrenches left.
    Updated Oct25- Prices reduced on remaining tools!
    Updated Oct21- Updated list with latest sales and availability of tools. PM with offers for multiple purchases.
    I put together a thread on PP with pictures and everything with several tool bags, SSS, DFS, wrenches, and so on. Since the Early S Registry site is where I go to figure out what the heck the tools are and what they go to, I thought it made sense to share a link to the Pelican Parts post.

    http://forums.pelicanparts.com/porsc...ml#post8834736

    All prices include free shipping to the CONUS. I will ship to other areas at cost.

    $25.00: #2 Selected-Special Steel West Germany 12-13mm
    $25.00: #7 Selected-Special Steel West Germany 12-13mm
    $25.00: #17 Selected-Special Steel West Germany 12-13mm
    $25.00: #4 Selected-Special Steel West Germany 17-19mm
    $25.00: #16 Selected-Special Steel West Germany 17-19mm

    $20.00: #19 Flat Blade for tool kit screwdriver
    $25.00: #22 Pulley nut wrench, 22mm

    $115.00: Tool Bag, Gray, waffle pattern, good snaps, nice original (used) condition
    $15.00: #12 Mito Drop Forged 8-10mm
    $20.00: #14 DIN 895 17-19mm

    I will take buyers in the order of PMs received. Please PM me with questions, but conditional "I'll take it" is always second to the person who will take the parts without condition. I only say this because I recently had someone PM with questions then was unhappy when someone else said they would take it.

    Warm regards to all!
    Morrie

    SOLD $15.00: Pliers, similar to tool kit part. Only pliers I have, no number beside picture.
    SOLD $15.00: Allen key with rubber boot. Picture has no number beside it.
    SOLD $40.00: Tool bag, like new, likely a reproduction. Very nice!
    SOLD $40.00: Spark plug wrench with allen key. Allen key has no markings. This is the first one pictured, with no number beside it.
    SOLD $30.00: 22mm Fan Pulley wrench
    SOLD $30.00: #1 Selected-Special Steel Germany 8-9mm
    SOLD $30.00: #3 Selected-Special Steel West Germany 14-15mm
    SOLD $30.00: #5 Drop Forged Steel Germany 12-13mm
    SOLD $30.00: #6 Drop Forged Steel Germany 8-9mm
    SOLD $30.00: #8 Drop Forged Steel Germany 14-15mm
    SOLD $30.00: #9 Drop Forged Steel Germany 10-11mm
    SOLD $30.00: #10 Drop Forged Steel Germany 12-13mm
    SOLD $45.00: #11 Wiesemann DIN3133 Chrom Vandaium Wrench Set
    SOLD $25.00: #13 Hazet 450 Chrom Vandaium 17-19mm
    SOLD $30.00: #15 Drop Forged Steel Germany 14-15mm
    SOLD $35.00: #18 Klien Spark plug wrench with allen key. Allen key is unmarked.
    SOLD $30.00: #20 Fan Pulley tool
    SOLD $45.00: #21 19mm Lug wrench, tapered end
    SOLD $60.00 - Tool bag from kit #2- individual tools moved to the post below this one
    SOLD $15.00: Porsche Fan Belt, old but unused, possibly for maintaining an accurate tool kit?
    SOLD Tool kit #1 is the more complete one with both snaps intact. $320 with free shipping to the CONUS.
    Last edited by Morrie; 10-28-2015 at 10:59 AM. Reason: updated sold items
    Morrie

    68 912 Coupe
    76 914 2.0 backdate
    75 914 1.8 (for sale)
    14 Infiniti Q60 HT Convertible
    08 Acura MDX aka "Porsche Support Vehicle"
    76 911S 3.0 SR Coupe (sold)
    89 944S2 Coupe (sold)
    924S (sold)
    76 912E (sold)
    67 912 (sold)

  2. #2
    PM sent on fan belt

  3. #3
    Senior Member METAVINYL's Avatar
    Join Date
    Mar 2012
    Location
    SANTA CRUZ, CA.
    Posts
    701
    PM Sent to you.

  4. #4
    PM sent for set
    Thanks
    Frank
    73.5 Snrf T
    71 Snrf T
    70S targa
    76 914 2.0
    82 Targa,
    85 Alfa GTV6
    60 Lancia Appia Zagato GTE
    Searching for transmission 7115322 (911/01)

  5. #5

    Caught up!

    All PMs responded. All purchases going to the shipper this evening. Thanks to everyone who responded with messages and offers.

    Please feel free to PM me with offers if you want multiple parts, or if you are looking for specific close up detail of something. This is everything I have so I can't help you if its not on the list. You can see, the plating is failing on many of these and the parts have surface corrosion that will come off with a wire wheel. Burnishing a little light oil into the metal before putting them away keeps them looking good.
    Morrie

    68 912 Coupe
    76 914 2.0 backdate
    75 914 1.8 (for sale)
    14 Infiniti Q60 HT Convertible
    08 Acura MDX aka "Porsche Support Vehicle"
    76 911S 3.0 SR Coupe (sold)
    89 944S2 Coupe (sold)
    924S (sold)
    76 912E (sold)
    67 912 (sold)

  6. #6
    Hi Guys,

    I updated (lowered) most of the prices, and resorted the list by tool type so it makes more sense than numerically. Also, here are pictures of all the remaining tools.

    #5, #8, #20, and Pliers below are SOLD. Everything else pictured is still available.
    Attached Images Attached Images
    Last edited by Morrie; 10-28-2015 at 11:01 AM.
    Morrie

    68 912 Coupe
    76 914 2.0 backdate
    75 914 1.8 (for sale)
    14 Infiniti Q60 HT Convertible
    08 Acura MDX aka "Porsche Support Vehicle"
    76 911S 3.0 SR Coupe (sold)
    89 944S2 Coupe (sold)
    924S (sold)
    76 912E (sold)
    67 912 (sold)

  7. #7
    Remaining tools listed below, and pictures condensed for easier viewing.

    $25.00: #2 Selected-Special Steel West Germany 12-13mm
    $25.00: #7 Selected-Special Steel West Germany 12-13mm
    $25.00: #17 Selected-Special Steel West Germany 12-13mm
    $25.00: #4 Selected-Special Steel West Germany 17-19mm
    $25.00: #16 Selected-Special Steel West Germany 17-19mm

    $20.00: #19 Flat Blade for tool kit screwdriver

    $25.00: #22 Pulley nut wrench, 22mm

    $115.00: Tool Bag, Gray, waffle pattern, good snaps, nice original (used) condition

    $15.00: #12 Mito Drop Forged 8-10mm
    $20.00: #14 DIN 895 17-19mm





    Morrie

    68 912 Coupe
    76 914 2.0 backdate
    75 914 1.8 (for sale)
    14 Infiniti Q60 HT Convertible
    08 Acura MDX aka "Porsche Support Vehicle"
    76 911S 3.0 SR Coupe (sold)
    89 944S2 Coupe (sold)
    924S (sold)
    76 912E (sold)
    67 912 (sold)

  8. #8
    Junior Member
    Join Date
    Nov 2020
    Posts
    3
    Hi -

    Any chance you might still have a SSS 12-13mm wrench? I realize it's and old thread but fingers crossed!

  9. #9
    Quote Originally Posted by clonmeliw View Post
    Hi -

    Any chance you might still have a SSS 12-13mm wrench? I realize it's and old thread but fingers crossed!
    It was definitely worth asking, but sorry, long gone.
    Morrie

    68 912 Coupe
    76 914 2.0 backdate
    75 914 1.8 (for sale)
    14 Infiniti Q60 HT Convertible
    08 Acura MDX aka "Porsche Support Vehicle"
    76 911S 3.0 SR Coupe (sold)
    89 944S2 Coupe (sold)
    924S (sold)
    76 912E (sold)
    67 912 (sold)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.