Mine seems to be in the same position as Ed’s….My template shows 267 mm from rear most edge of fender, and 95 mm from fender edge at cowl strip.
cm
Mine seems to be in the same position as Ed’s….My template shows 267 mm from rear most edge of fender, and 95 mm from fender edge at cowl strip.
cm
Chuck Miller
Creative Advisor/Message Board Moderator - Early 911S Registry #109
R Gruppe #88
TYP901 #62
'73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
'67 Malibu 327 spt cpe - Period 350 Rebuild
’98 Chevy S-10 – Utility
’15 GTI – Commuter
Realize you have to clear the fuel door cable.
Early S Registry member #90
R Gruppe member #138
Fort Worth Tx.
Before drilling make a final test with the antenna base that the mark is in right position, so the antenna will be straight when its folded out.
Best Nick
Fantastic, thank you everyone!
Hi Everyone:
In the process of restoring my 71T and I need your help to determine the correct hole size (in the fender) for a Hirschmann 4900 LS18. The original left fender was replaced with a Porsche factory fender but it doesn’t have the antenna hole.
Best,
Ravi
------------------------------------------------
1971 911T/2.45 engine spec Coupe / Gold Metallic on Black
1995 911 C2 / Guards Red on Cashmere Beige (Sold)
Ravi
I can give you my existing dimensions , if you did not get info yet
I am just ready to mount mine same model inside the fender panel….
anyone have photo/dimensions of the mount
Thanks for assistance
Frank
73.5 Snrf T
71 Snrf T
70S targa
76 914 2.0
82 Targa,
85 Alfa GTV6
60 Lancia Appia Zagato GTE
Searching for transmission 7115322 (911/01)
------------------------------------------------
1971 911T/2.45 engine spec Coupe / Gold Metallic on Black
1995 911 C2 / Guards Red on Cashmere Beige (Sold)
Frank,
Here is a picture with the correct factory mount for 69-71 (red X) and the mount for 72+ (Yellow circle):
------------------------------------------------
1971 911T/2.45 engine spec Coupe / Gold Metallic on Black
1995 911 C2 / Guards Red on Cashmere Beige (Sold)
Ravi
Can you shoot photo of your installation under fender …
So checking the hardware that came for my installation ,looks like this set is not accurate ?
What year is this set correct for ?
Looks like I will need a correct set of hardware …..
anyone want to trade or sell correct set ?
Thanks
Frank
73.5 Snrf T
71 Snrf T
70S targa
76 914 2.0
82 Targa,
85 Alfa GTV6
60 Lancia Appia Zagato GTE
Searching for transmission 7115322 (911/01)
Frank,
Your PN box is full.