Results 1 to 8 of 8

Thread: Drivers side Mirror hole location

  1. 01-16-2021, 07:40 AM #1
    Simonjjb
    Simonjjb is online now
    Senior Member Simonjjb's Avatar
    Join Date
    Dec 2013
    Location
    Connecticut/Florida
    Posts
    1,385

    Drivers side Mirror hole location

    My 1971 had aftermarket mirrors that were installed and corresponding holes drilled that were not correct. When we stripped and painted the body all the holes these were welded up. Does anyone have the exact location of the holes for the drivers door? I know they are obviously close to the two inside holes. Below is what I found for a passenger door option, but I don't believe the holes are in the same location?

    Name: B62BF159-A4CD-4CA3-A0E5-000DC070FBED_4_5005_c.jpeg Views: 293 Size: 66.5 KB
    1968 911L Coupe - Golden Green
    1971 911S Coupe - Gemini Blue
    1973 911S Targa - Signal Yellow
    1974 914 2.3 - Sunflower Yellow
    Reply With Quote Reply With Quote
  2. 01-16-2021, 08:53 AM #2
    tom1394racing
    tom1394racing is offline
    Senior Member
    Join Date
    May 2006
    Location
    CT
    Posts
    2,903
    Simon

    Here are the holes for the driver's side view mirror on an original door. Email me and we can figure out which measurements you need.
    Attached Images Attached Images  
    Tom Butler
    1973 RSR Clone
    1970 911E
    914-6 GT Clone in Progress
    Reply With Quote Reply With Quote
  3. 01-16-2021, 11:46 AM #3
    Simonjjb
    Simonjjb is online now
    Senior Member Simonjjb's Avatar
    Join Date
    Dec 2013
    Location
    Connecticut/Florida
    Posts
    1,385
    HI Tom,

    I couldn't find your email...here is what I am looking for....Thanks, Simon
    I am showing measurements to center of the drill hole

    Name: 537FB480-A79A-46A6-80A2-4879B58908DE_1_201_a.jpeg Views: 265 Size: 193.3 KB
    1968 911L Coupe - Golden Green
    1971 911S Coupe - Gemini Blue
    1973 911S Targa - Signal Yellow
    1974 914 2.3 - Sunflower Yellow
    Reply With Quote Reply With Quote
  4. 01-17-2021, 08:00 AM #4
    tom1394racing
    tom1394racing is offline
    Senior Member
    Join Date
    May 2006
    Location
    CT
    Posts
    2,903
    here you go. All measurements in mm
    Attached Images Attached Images  
    Tom Butler
    1973 RSR Clone
    1970 911E
    914-6 GT Clone in Progress
    Reply With Quote Reply With Quote
  5. 01-20-2021, 06:15 AM #5
    Simonjjb
    Simonjjb is online now
    Senior Member Simonjjb's Avatar
    Join Date
    Dec 2013
    Location
    Connecticut/Florida
    Posts
    1,385
    Just before I drill......Three questions...

    1) When installed, is the mirror horizontally level ? See first photo. Are the two red lines equal in length? If so, there would be a slight slant to the holes as the upper door edge slopes down. Or Do I drill such that holes are level?
    2) Are there two or three holes? One post I read said there is a mirror adjustment hole in addition to the two bolt holes
    3) Two different pictures below show the slotted bolt in two different locations? Is one more correct than the other?
    Name: 9C4E8EAA-B175-4504-9FC2-2C72D989C3FE_4_5005_c.jpeg Views: 223 Size: 47.4 KB
    Name: F2B679D8-F7FE-44B6-BEE3-341C197567DA_4_5005_c.jpeg Views: 218 Size: 43.6 KB
    Name: 8D0A31C7-18C9-4DC0-8EA7-B2457643467D_4_5005_c.jpeg Views: 214 Size: 38.6 KB
    1968 911L Coupe - Golden Green
    1971 911S Coupe - Gemini Blue
    1973 911S Targa - Signal Yellow
    1974 914 2.3 - Sunflower Yellow
    Reply With Quote Reply With Quote
  6. 01-20-2021, 09:00 AM #6
    tom1394racing
    tom1394racing is offline
    Senior Member
    Join Date
    May 2006
    Location
    CT
    Posts
    2,903
    Simon

    You have a PM from me.
    Tom Butler
    1973 RSR Clone
    1970 911E
    914-6 GT Clone in Progress
    Reply With Quote Reply With Quote
  7. 01-31-2024, 04:45 AM #7
    formulamotorsports
    formulamotorsports is offline
    Junior Member
    Join Date
    Jan 2024
    Posts
    1
    Guys, Can you PLEASE share those measurements with us? It would be greatly appreciated.
    Reply With Quote Reply With Quote
  8. 01-31-2024, 05:35 AM #8
    tom1394racing
    tom1394racing is offline
    Senior Member
    Join Date
    May 2006
    Location
    CT
    Posts
    2,903
    Quote Originally Posted by formulamotorsports View Post
    Guys, Can you PLEASE share those measurements with us? It would be greatly appreciated.
    You can email me at

    tomsrennshop@gmail.com
    Tom Butler
    1973 RSR Clone
    1970 911E
    914-6 GT Clone in Progress
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules


Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.