which clamp for '73? Norma or Gemi?

[swisscheese]

folks, unfortunately, I've lost a number of clamps, so in search of "new" ones, I'm in doubt which type they shoudl be:

For the large vent hoses. the parts manual gives 999.512.128.02 (new number 999.512.349.02 (50-70 x 9mm). Should be a Norma or Gemi?



I've seen two options for th 50-70:
Either Norma:


or Gemi:



For the clamp on the sleeve, the manual gives : 999 512 181 02 (57-76mm x 9mm):




and the two clamps from the aluminium flexhose to the heat exchanger on the regulator; manual says 999 512 348 02 (38 - 58mm X 9mm)



thnx for info.

[edmayo]

All original clamps were Gemi, I don't know if they are available new anymore, at least not that I've seen.

[72targa]

Are any of these of use?

https://www.partsklassik.com/m-74-gemi.aspx

[swisscheese]

thanks. but it seems all of the ones I have are like this:

[gled49]

If u want original, right side clamp in first post is it. Just not available new anymore. The hoarders got to let loose of them. Post #4 is correct. Clean them, re-plate and your good.

[swisscheese]

If u want original, right side clamp in first post is it. Just not available new anymore. The hoarders got to let loose of them. Post #4 is correct. Clean them, re-plate and your good.

re-plating not always a success..