Results 1 to 6 of 6

Thread: Part number for Engine panel bushing

  1. #1

    Part number for Engine panel bushing

    Hi guys on the pet it’s just shows hose as the bushing with a bolt but I have
    Seen a single threaded stud one end and the other end to take a bolt .

    I have a Lwb 69 any ideas boys

    Thanks

  2. #2
    Senior Member
    Join Date
    Apr 2012
    Location
    Simi Valley Ca
    Posts
    501
    Please be more specific as to what you are talking about.
    Bob B

  3. #3
    Hi bob thanks for the reply , it the electrical panel on the left in the
    Engine bay . It’s the rubber / bush that holds it to the body .

    Thanks

  4. #4
    Senior Member
    Join Date
    Aug 2020
    Location
    SF Bay Area
    Posts
    239
    #4 below you mean?

    Name:  Screen Shot 2021-12-03 at 5.55.14 AM.jpg
Views: 164
Size:  105.0 KB
    - 1969 911T Ossi Blue #3981

  5. #5
    Jonny,
    I used a piece of soft fuel hose cut to length. I did the same for the fuel console.

  6. #6
    Senior Member
    Join Date
    Apr 2012
    Location
    Simi Valley Ca
    Posts
    501
    My car has 4 rubber washers in the wheel well and 4 behind the panel. The ones in the wheel well are about 5 mm thick, 16 mm dia. and 6 mm hole. The ones behind the panel seem to be thicker. I will pull one out tomorrow and take a pic.
    Stoddard wants over $7 for part #4 above.
    Bob B
    Last edited by SIMI BOB; 12-03-2021 at 11:28 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.