Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: installing ST rear flares question

  1. #1
    Senior Member tcsracing1's Avatar
    Join Date
    Nov 2015
    Location
    Somewhere in a galaxy far, far away....
    Posts
    1,387

    installing ST rear flares question

    im installing rear ST flares on my 1972T.

    Previous owner had SC rear flares on the car.

    We installed the driver side flare and looks great. wheel in nicely centered.
    the passenger side is different story. The wheel dosnt sit center? So we didnt weld the flare in place until we figure this out.

    The car has never been in a collision.
    It has newer carrera banana arms.
    The suspension and spring plates are aftermarket and currently very old.

    Would the wheel track be off slightly due to bad bushings or spring plate adjstabilty?
    LOOKING FOR 1967S TRANSMISSION #103586
    Looking For 1969T Engine #6195922
    Looking For 1969T Transmission #7194313

    Looking for 1969T Transmission #7195495
    www.tcspeed.com

  2. #2
    Senior Member
    Join Date
    Dec 2010
    Location
    Wilmington, DE
    Posts
    1,403
    Measure the good side then measure the other side and see where the measurements differ. You need to figure out if it's the chassis or the suspension. Maybe the car hasn't been in a collision but the newer trailing arms have. You won't know until you measure and compare.
    A part isn't purchased until paid.

    The 9 Store LLC.

  3. #3
    Moderator Chuck Miller's Avatar
    Join Date
    Oct 2002
    Location
    Reseda, CA.
    Posts
    12,458
    Hmmm ...

    - How far off is the ride side center line ?

    - And, just taking a flyer here ..... Could it be you have two driver's side (left) flares?
    Last edited by Chuck Miller; 04-14-2022 at 08:24 AM.
    Chuck Miller
    Creative Advisor/Message Board Moderator - Early 911S Registry #109
    R Gruppe #88

    TYP901 #62
    '73S cpe #1099 - Matched # 2.7/9.5 RS spec rebuild
    '67 Malibu 327 spt cpe - Period 350 Rebuild

    ’98 Chevy S-10 – Utility
    ’15 GTI – Commuter

  4. #4
    Senior Member
    Join Date
    Sep 2009
    Location
    COPENHAGEN, DENMARK
    Posts
    778
    post some pics of the flares

  5. #5
    Senior Member tcsracing1's Avatar
    Join Date
    Nov 2015
    Location
    Somewhere in a galaxy far, far away....
    Posts
    1,387
    here is a pic before i started.
    flares from anna thom.
    Attached Images Attached Images  
    LOOKING FOR 1967S TRANSMISSION #103586
    Looking For 1969T Engine #6195922
    Looking For 1969T Transmission #7194313

    Looking for 1969T Transmission #7195495
    www.tcspeed.com

  6. #6
    Nick D member #403 nickd's Avatar
    Join Date
    Jul 2005
    Location
    Landenberg, PA
    Posts
    1,166
    As I recall our lead metal guy made the same comment re differences between L & R flares ....
    Nick D - Run Flat

    1973 RHD 911 Carrera RS #0358 - Fun Car
    2016 Cayenne Diesel - Tow Car
    2017 Macan S - Better Half's Car

    1955 356 Speedster SOLD
    1976 911 2.7 SOLD
    2006 Cayman S SOLD
    2006 Cayenne S SOLD
    2008 Carrera S F77 SOLD
    2011 Cayenne S TOTALLED (T-Boned but kept us safe)
    2015 Macan S SOLD
    2015 GT3 - Track Car
    2016 Cayenne SOLD
    2016 Cayenne GTS TOTALLED (Bloody big deer)

    Still looking for 1st Edition Carrera RS book #358.

    Life is way too short to drive boring cars.

  7. #7
    Senior Member NZVW's Avatar
    Join Date
    Feb 2017
    Location
    Auckland NZ
    Posts
    1,776
    So your MY72 had its rear guards replaced with SC flares and now your fitting ST arches.
    Who supplied the new ST flares?
    Mark

  8. #8
    Senior Member tcsracing1's Avatar
    Join Date
    Nov 2015
    Location
    Somewhere in a galaxy far, far away....
    Posts
    1,387
    Quote Originally Posted by NZVW View Post
    So your MY72 had its rear guards replaced with SC flares and now your fitting ST arches.
    Who supplied the new ST flares?
    anna thom in europe
    LOOKING FOR 1967S TRANSMISSION #103586
    Looking For 1969T Engine #6195922
    Looking For 1969T Transmission #7194313

    Looking for 1969T Transmission #7195495
    www.tcspeed.com

  9. #9
    Senior Member tcsracing1's Avatar
    Join Date
    Nov 2015
    Location
    Somewhere in a galaxy far, far away....
    Posts
    1,387
    The problem we have is that one flare is 24" wide and the other flare is 25.5" wide?
    Attached Images Attached Images   
    LOOKING FOR 1967S TRANSMISSION #103586
    Looking For 1969T Engine #6195922
    Looking For 1969T Transmission #7194313

    Looking for 1969T Transmission #7195495
    www.tcspeed.com

  10. #10
    Senior Member tcsracing1's Avatar
    Join Date
    Nov 2015
    Location
    Somewhere in a galaxy far, far away....
    Posts
    1,387
    another issue i have is the fender is not extending enough to cover the tire.

    my 1972 currently has 1985+ carrera bananna arms. (would they be wider then stock 1972 bananna arms therefore i need to install stock 1972 bananna arms?)
    Attached Images Attached Images  
    LOOKING FOR 1967S TRANSMISSION #103586
    Looking For 1969T Engine #6195922
    Looking For 1969T Transmission #7194313

    Looking for 1969T Transmission #7195495
    www.tcspeed.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.