Aluminum ducktail frame

[Unobtanium-inc]

Anyone recognize this, came in with a car recently. The guy said it was the frame from a Factory Ducktail.

Any ideas?

Thanks-
Adam

[haul]

Rare Porsche RS 73` NOS ducktail, rear spoiler, ducktail, with aluminum frame, unpainted, weight approx. 4 kg. NEW NOS

https://www.ebay-kleinanzeigen.de/s-...ontent=app_ios

[dirk07]

Haul,

strongly recommend to ask the seller for a local pick up.
All parts I tried to buy from him, "had been sold" when I asked for a pick-up. ;-)

[OliveR]

Rare Porsche RS 73` NOS ducktail, rear spoiler, ducktail, with aluminum frame, unpainted, weight approx. 4 kg. NEW NOS

https://www.ebay-kleinanzeigen.de/s-...ontent=app_ios

Rare Porsche RS 73` NOS ducktail, rear spoiler, ducktail, with aluminum frame, unpainted, weight approx. 4 kg. NEW NOS

https://www.ebay-kleinanzeigen.de/s-...ontent=app_ios

Apparently it does not have the holes for the latches and drain holes

[edmayo]

Adams lid has a clearance bubble on the left side, the engine compartment light bracket in the center, and possibly no license light holes. I think its a later generation frame, but don't know what.

[moito]

pretty sure it is a later production thing.

scallope,no lizlplt light holes and i do not remember that i`v ever seen the trademark stamped so prominent 0ther than on 3,2 g-mods and later production spare lids

[blue72s]

Haul,

strongly recommend to ask the seller for a local pick up.
All parts I tried to buy from him, "had been sold" when I asked for a pick-up. ;-)

But the seller has 100% positive Feedback on ebay.de

[70SATMan]

SCRS part?? Mucho Alloy used on that ride and the frame would be consistent with SC tooling.

[OliveR]

SCRS part?? Mucho Alloy used on that ride and the frame would be consistent with SC tooling.

Or 911 1978 gr4 rally car...

[haul]

I asked the seller about the stamping and else:
„….Hello, the spoiler has no Porsche marking, I bought it from a Porsche restorer near Stuttgart years ago for 3500 EUR, the company also works for the Porsche Museum. If I wanted to convert my vehicle into an RS clone, I have now refrained from this project. However, the spoiler comes from the old stock of the manufacturer who used to make the ducktails for Porsche….“