Results 1 to 6 of 6

Thread: Early 911 Reproduction Sheetmetal-Headlight Bucket;Left Rear Bumper;Partial Lockposts

  1. #1

    Early 911 Reproduction Sheetmetal-Headlight Bucket;Left Rear Bumper;Partial Lockposts

    These are all leftovers of reproduction panels I purchased and didn’t use in rebuilding my 69 911e. One whole, some partial, some disassembled.
    The Headlight Bucket is unmodified- I just didn’t end up using it.
    Headlight Bucket- $100 (plus shipping from 37388) SOLD

    The Left Rear Bumper I never could get to fit right on my car (the car had been hit on the left rear) and I separated the support and outer bumper in the quest to get it to fit. I ultimately repaired and reused the original. Otherwise, it’s just a dissembled version of a part that’s ~$700 now.
    Left Rear Bumper- $200 (plus shipping from 37388)SOLD

    The Lockposts and Rear Cross Member parts are the cutoffs that I didn’t use and hopefully they’re of value to someone that needs the opposite end than I did. There’re two lockpost remnants, one that ends above the striker mount (short one) and one that ends below the striker mount (long one). There’s more than half of the rear cross member that extends just to the left of the latch mount. Damage on my car was limited to the left side.

    Lockpost Top (short one)- $20 (plus shipping from 37388)

    Lockpost Top (long one)- $40 (plus shipping from 37388)

    Partial Rear Cross Member- $100 (plus shipping from 37388)
    Attached Images Attached Images
    Last edited by tc911e; 02-05-2023 at 04:07 PM. Reason: Sold part

  2. #2
    Junior Member
    Join Date
    May 2021
    Location
    Los Angeles
    Posts
    19
    I’ll take the headlight bucket.

  3. #3
    Junior Member
    Join Date
    May 2021
    Location
    Los Angeles
    Posts
    19
    PM Sent - haven’t heard back?

  4. #4
    Sorry for the delay, but I was away for a few days. I sent a PM on 1/30 (or I think I did).
    Tim

  5. #5
    Member
    Join Date
    Feb 2018
    Location
    Portland, Maine
    Posts
    71
    I’ll take the left rear bumper/support. PM sent.
    Oliver
    71’ 911T Coupe
    72’ Land Rover Series III 88”
    Early 911S Registry #3663

  6. #6
    Member
    Join Date
    Feb 2018
    Location
    Portland, Maine
    Posts
    71
    You may need more posts to be able to PM?
    Oliver
    71’ 911T Coupe
    72’ Land Rover Series III 88”
    Early 911S Registry #3663

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.