Results 1 to 2 of 2

Thread: Shoulder belt bushings for a late 60s thru early 70s Targa

  1. #1

    Shoulder belt bushings for a late 60s thru early 70s Targa

    Hello, Iím looking for the bushings that reside behind the targa bar padding for the upper shoulder belt attachment. Thanks! John


  2. #2
    Senior Member
    Join Date
    Aug 2020
    Shawnee, OK
    Have one bushing that came with a scrap yard 1969 Repa seat belt- not needed for my coupe, maybe came from a targa? The inside of the bushing is too small for the Repa shoulder bolt, but a 11mm x 1.25 pitch bolt will fit. Have one bolt of this size about 1Ē long- donít know of any other bolts of this size on the car. Bushing dimensions are ID 11.6mm, large OD is 19.1mm, two small ODs are 14.8 and 14.4mm-length 11mm
    If interested how about an offer?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.