Results 1 to 3 of 3

Thread: 2.4S vs. 2.2S MFI -- DIFFERENCES?

  1. #1

    2.4S vs. 2.2S MFI -- DIFFERENCES?

    What are the differences between the 2.2S and 2.4S MFI systems? Pumps and stacks only? Thanks.

  2. #2
    All S throttle bodies have the same port size on 69'-73' MFI cars, that is they are 38mm where they meet the stack and 36mm where they meet the intake port on the head.

    However, the stud spacing differs where the stack meets the throttle bodies. The 2.2 mag stacks and the 2.4/2.7/3.0 plastic stacks all have the same spacing. The 69' 2.0 stacks have a unique stud spacing compared to the above stacks.

    So basically, only 2.0 stacks only go with 2.0 TB's. 2.2/2.4/2.7/3.0 stacks can mix and match with 2.2/2.4/2.7/3.0 TB's.

    The injector lines and injectors are identical.

    All throttle bodies T, E and S have a bore of 38mm where they meet their appropriate stack. They differ only in that the side that meets the head matches that appropriate port. i.e. 36mm for S, 32mm for E and 29mm for T MFI motors.

    So what this means is that any T or E throttle body can be bored out to 36mm where it meets the head port and be used for an S setup with the appropriate stack.

    One more difference between the 2.2 and 2.4 MFI motors is the cold start enrichment setup. The 2.2 motors had the fuel sprayed in from a fitting in the metal air box above the mag stack. On 2.4 motors the fuel sprays from the fitting in the side of the plastic stack. 2.4 motors also had plastic air boxes.
    Bobby
    71' Olive 2.2E Targa / Early S #491

    I've always considered the glass to be half full...that is until I reached middle age and realized that it is actually half empty.

  3. #3
    Senior Member
    Join Date
    Jun 2003
    Location
    Toronto
    Posts
    362
    The 2.4 throttle bodies also had a nipple for a vaccuum line that was used for the vaccuum retard distribututors.

Similar Threads

  1. Value differences T vs S
    By RS-GT in forum General Info
    Replies: 28
    Last Post: 06-13-2014, 09:31 AM
  2. differences between 2.7 RS MFI and 2.4 S MFI
    By pacorron in forum Technical Info
    Replies: 3
    Last Post: 11-10-2011, 11:04 AM
  3. Differences in 993 from 95-98?
    By Sacto S in forum Off Topic
    Replies: 12
    Last Post: 09-25-2008, 10:53 AM
  4. '70 and '71 911 differences
    By gulf908 in forum Technical Info
    Replies: 11
    Last Post: 04-14-2008, 10:11 AM
  5. differences between swb and lwb
    By jk356 in forum General Info
    Replies: 0
    Last Post: 07-12-2007, 11:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.