Hi Gang,

I'm looking for the definative answer regarding my Aluminum control arms for my 71T conversion car.

I have the control arms, these are the early models with the sway bar ball joints. I have a set of Koni's with the 14mm bolt hole. I have an early (76) Turbo 18mm bar. I've heard:

1. Everything will bolt right up.
2. Everything will bolt right up but you'll need to take the dust cover off the Koni's
3. You'll need to weld in a new rear crossmember with the proper shock angles.

Anybody BTDT before who can offer some insight before I hit the garage and attempt the final install?

Many Thanks!

E.