Results 1 to 8 of 8

Thread: RS Touring style bumper trims wanted

  1. #1

    RS Touring style bumper trims wanted

    Looking for RS style bumper trims for a touring style replica, can anyone assist or point me in the right direction?

    Cheers James
    70 Carrera RS Clone

  2. #2
    Stoddards still sold them new as of early this year.
    Clyde Boyer





    1973 2.4E Coupe RHD Aussie 5 speed
    1973 2.4E Coupe RHD Aussie 5 speed my first ever 911 (1995)







    Early S Registry Member #294
    First Aussie R Gruppe Member #366
    TYP 901 Register Inc #6

  3. #3
    Registry member# 206 fourteenten's Avatar
    Join Date
    Oct 2002
    Location
    The Netherlands
    Posts
    2,437

    bumper trim

    Hi Clyde,

    The front is no problem, even at Porsche, but are you sure Stoddards has the rear bumper trim for the RS? NLA at Porsche for a while now.

    Thanks,

    Cees

  4. #4
    Well all I can say is I ordered them and they arrived although I did check the invoice and while I thought it was early this year it turns out to be early last year!!!.

    Boy where did that 18 months go.

    Part # was 911 505 097 00 and they were not reproductions.
    Clyde Boyer





    1973 2.4E Coupe RHD Aussie 5 speed
    1973 2.4E Coupe RHD Aussie 5 speed my first ever 911 (1995)







    Early S Registry Member #294
    First Aussie R Gruppe Member #366
    TYP 901 Register Inc #6

  5. #5
    Registry member# 206 fourteenten's Avatar
    Join Date
    Oct 2002
    Location
    The Netherlands
    Posts
    2,437

    Smile RS bumper trim

    Thanks Clyde,

    I will go after it right away, hope I am lucky with Stoddard...

    Cheers,

    Cees

  6. #6
    I just talked with Stoddards and the P/N for the Carrera RS is:

    901 505 251 22 (left side)
    901 505 252 22 (right side)

    They have them in stock. The standard end caps are part 21's.

    Gib Bosworth

  7. #7
    The PO of my car hand bent/adapted stock narrow body bumper trim for the RS fenders on my car. A little patience and you could most likely do the same, too.
    Kenik
    - 1969 911S
    - 1965/66 911
    - S Reg #760
    - RGruppe #389

  8. #8
    Well it depends on what you call bumper trim.

    My version is the alloy trim with rubber insert is the bumper trim and the bright alloy pieces are the bumper end caps.

    My part number as mentioned before is the trim number and lettsrollbabe has listed part numbers for the end caps.

    There is no right and left for the bumper trim its the same for both sides
    Clyde Boyer





    1973 2.4E Coupe RHD Aussie 5 speed
    1973 2.4E Coupe RHD Aussie 5 speed my first ever 911 (1995)







    Early S Registry Member #294
    First Aussie R Gruppe Member #366
    TYP 901 Register Inc #6

Similar Threads

  1. USA suppliers of SC RS style front bumper?
    By Kaefer in forum Other Porsche Passions
    Replies: 2
    Last Post: 02-02-2014, 11:11 AM
  2. WTB - front bumper spoiler S Style for 71 911
    By cwrawk in forum For Sale: 911 Parts
    Replies: 0
    Last Post: 03-05-2013, 09:46 PM
  3. Wanted - RSR-style megaphones
    By andyjboy in forum For Sale: 911 Parts
    Replies: 1
    Last Post: 05-22-2012, 09:11 AM
  4. FS: Steel Front Bumper (T/E Style)
    By greggearhead in forum For Sale: 911 Parts
    Replies: 0
    Last Post: 07-12-2010, 03:56 PM
  5. WTB: RS Touring side molding and Steel rear Bumper
    By VinnyC in forum For Sale: 911 Parts
    Replies: 7
    Last Post: 03-11-2006, 05:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.