Gents,
I need an early aluminum case or two (901/01 preferred) also a std/std counterweighted crankshaft and biral cylinders (non bored).
Anyone out there has some?
Cheers, Juan
Gents,
I need an early aluminum case or two (901/01 preferred) also a std/std counterweighted crankshaft and biral cylinders (non bored).
Anyone out there has some?
Cheers, Juan
Juan - Member # 321
Ft. Lauderdale
Mission Foods Porsche GT3 Cup USA Champion
Klub Sport Champion
Rolex Endurance Champion
Louis Chevrolet Endurance Champion
HSR Sprint Champion
PCA Club Race Champion
Race cars and parts for sale; videos and photos at: www.alteregoracing.com
"Success is the ability to go from one failure to another with no loss of enthusiasm." -Sir Winston Churchill
Hello: Let me look to see what numbers are on the aluminum cases that I have. Do they have to be 01 cases? I have some 906/911R pistons and will check to see what standard bore 80mm cylinders I have. On the cranks, I don't know off the top of my head if they are standard or need grinding.What else do you need? Thanks Eric
Eric,
I appreciate your feedback, I'm checking all over the place currently.
Last weekend I threw a rod (perhaps 2) and have quite a sizeable hole on my MAG engine case....... I'm also trying to find a good mag case to properly rebuild my 69S 9currently sporting an alu case).
I will not need pistons (well I will but not factory supplied). What else do you have available?
I will have some stuff available soon but mostly race parts (roll cage, sparco seat, 2 mocal coolers), a 10/10 c/w crank, electromotive twin plug setup, a std bosch distributor, oil tank, oil console, .... I'll also have some body parts (RS spoiler bumper, stock doors).
Thanks MUCH!
Juan - Member # 321
Ft. Lauderdale
Mission Foods Porsche GT3 Cup USA Champion
Klub Sport Champion
Rolex Endurance Champion
Louis Chevrolet Endurance Champion
HSR Sprint Champion
PCA Club Race Champion
Race cars and parts for sale; videos and photos at: www.alteregoracing.com
"Success is the ability to go from one failure to another with no loss of enthusiasm." -Sir Winston Churchill
I just talked to Cliff Brown and he told me he had some 1R mag cases for sale; about $100/ea. Give him a ring:
Cliff Brown
Porsche-R-Us
415-673-1485
415-846-1680 cell
San Francisco
Kenik
- 1969 911S
- 1965/66 911
- S Reg #760
- RGruppe #389
PM Sent on 906/911R pistons.
Kenik
- 1969 911S
- 1965/66 911
- S Reg #760
- RGruppe #389