Will stock headrests fit into GTS seats?

[bob tilton]

Thinking out loud here...yes?

[72tii]

They will on the Nurburgring seats as I've tried them on mine.

Mike

[mike walker]

My 73 headrests fit the repo sport seats

[Chris Tallon]

Yes,

They certainly fit the GTS ST seat.

[GTS]

Hi All,
Yes the headrest will fit, as we use the same dimensions and pattern from the original seats, you can always use your original headrests on our seats.We have suggested to many of our customers when they wanted to achieve a more original look,that's why we do not have anymore the little manufactureres badge riveted to back.
So far we haven't offered the adjustable/tiltable headrest as an option for all seat, but we will do so in the near future.
To make the seats more authentic,period and ergonomical.
Thanks for your comments. with regards Stefan GTS classics 702 353 7175

[GTS]

Hi All,
forgot, if you want to take the headrests out, go behind the seat-follow the headrest post line down to the back of the seat-press gently against the back until you have found the little spring mechanism-press against it on both inner sides and you will be able to release the headrests.
Just for those who haven't done that yet. regards Stefan

[bob tilton]

Thanks for the replies guys and thank you Stefan for answering my other question about the logo - good to know.

[bob tilton]

Stefan,
Are the Sebrings the closest match to Scheels? Can they be ordered to have the corduroy run side to side instead of back to front? TX!

[jtkkz]

Stefan
Are the tilting bracket available yet for the nurburgring seats?

[GTS]

Hi All,
We certainly can nearly do any customer request,Scheel also made corduroy on the center and outside, so whatever you want we will try hard to deliver.

However on the tiltingbrackets I have no acceptable solution now, all the samples I got were unacceptable.We are working a solutions for all seats to fit. Sorry we keep working on that issue.
With regards Stefan