I know zero about these but is this a high asking price?
http://cgi.ebay.com/ebaymotors/Porsc...temZ4637636821
I would hate to have to replace one of those. Ouch!
I know zero about these but is this a high asking price?
http://cgi.ebay.com/ebaymotors/Porsc...temZ4637636821
I would hate to have to replace one of those. Ouch!
67 Normale, Old Rusty
67 R Inspired and on a Diet
73 T/ST Caged Beast
RGruppe #383
S Registry #739
I think that's probably a bargain. I know very little about them but have crossed paths with a couple 356 mechanics. In 1992-3 Heinz Bade, who had been Bruce Jennings' mechanic did the machine work on my 911 case. He had a 4-cam 356 in his shop. It has a metal fan housing in the position toward the read of the car, more like a 911 fan than a VW. Really special cars.
I found these specs for a 1960 4 cam on the internet: 141 hp out of 1600cc! Not bad. It was the RS of it's day (but production numbers were much lower), I have yet to find a price on one and I know I can't afford it, so I don't even ask. They made a 2 liter 4 cyl, but i haven't found the specs for that.
Engine
Engine Configuration F
Cylinders 4
Aspiration/Induction Normal
Displacement 1.60 L | 97.6 cu in. | 1599.7 cc.
Valves 8 valves.
2 valves per cylinder.
Valvetrain DOHC
Horsepower 141.00 HP (103.8 KW) @ 6500.00 RPM
HP to Weight Ratio 12.9 LB / HP (Vehicles with similar ratio)
HP / Liter 88.1 BHP / Liter
Redline 7500
Bore 3.44 in | 87.4 mm.
Stroke 2.60 in | 66 mm.
Compression Ratio 9.80:1
Fuel Feed 2 Weber Carbueretors
---
They also have two distributors mounted at 90 degrees.
I'll try to find pictures of an engine and post them.
George Vermillion
Early 911S Registry Member #101
'70 2,2S - Green Metallic
'90 Syncro Westfalia - White
Here's a link with an interesting restoration story: http://www.356carrera.net/restoration.asp?cat=2
and a picture of the engine.
George Vermillion
Early 911S Registry Member #101
'70 2,2S - Green Metallic
'90 Syncro Westfalia - White
This crank and the Mahle piston set the guy is selling are from a 547/1 1500GS Carrera 4 cam engine - I have just finished the rebuild on my engine and am wishing I'd found this guy before we started!
The roller bearing crank is a delicate Ernst Fuhreman design and produced 100bhp from 1500cc in 1956 - with fantastic reliability.
Only four RHD 'A' T2 GS's were produced and mine is one of these - I've seen two others (LHD) for sale at around the £165,000 region - yes, they're rare and precious - and the parts are painfully expensive
But they're great fun to drive
P
--
1973 911 Carrera RS #496
Early 911S Registry #1808
Ex-Brumos employee, Bill Bencker, has told stories about "dumpster diving" for Carrera parts when Brumos decided it wasn't in the 356 Carrera business anymore.
Cranks, cams, heads and all hard parts for the engines were there for the taking. Not an urban myth. This really happened.
Tom
Early S Registry #235
rgruppe #111
How to kick a man when he's down I've also heard that Carrera Motors in South Africa still has brand new old stock Carrera engines / spares etc - would be fun to find a box of these somewhere!Originally Posted by sithot
P
--
1973 911 Carrera RS #496
Early 911S Registry #1808