'69-71 911S MFI throttle bodies, 36mm pair (NOS or rebuilt).

[911E4ME]

These are 36mm MFI throttle bodies which I got in a lot with some other 911S parts. These are in perfect condition and are either New Old Stock (NOS) or freshly rebuilt. Every screw, spring, butterfly, fuel line holder, throttle rods, etc, is new.

Go here for pictures and discussion:

http://forums.pelicanparts.com/showt...hreadid=303320

Looking for best offer over $800. Please PM me (or email me by clicking on my name above) with your offer. Thanks.

[Eric911S]

Hello; Just to let you know they are rebuilt. Looks like they were done by either Eurometrix or Henry. Porsche did not use red paint they used yellow. Thanks Eric

[911scfanatic]

'69 throttle bodies are a one year only deal and are not interchangable with '70-'71. '69 t/b's have different stud spacing and must be used with '69 stacks.

[911E4ME]

Yeah...the guy I got it from lived near Supertech and had done business with him in the past, so these are likely Supertech rebuilt. Thanks for the comments and corrections.

According to Andy on Pelican:

The bottom line is:

'69 E/S throttle bodies can only be used with '69 E/S magnesium stacks - you can't use '69 throttle bodies with later 2.2 (magnesium) or 2.4 (plastic) stacks or the '69 stacks with later 2.2 or 2.4 throttle bodies.