WTB
Anyone know of a pair of 10x15 Minilites that may be available?
I would like to use them on a 71S - ST project. All leads appreciated.
Thank you
WTB
Anyone know of a pair of 10x15 Minilites that may be available?
I would like to use them on a 71S - ST project. All leads appreciated.
Thank you
Early 911S Registry
Looking for engine 960 168
Looking for gear box 103 165
Edmond Harris shoud have 9x15 mag minilitesOriginally Posted by Flunder
http://www.racecar.co.uk/edmondharri...p?ProductID=22
#rennfrog
OliveR,
Thank you for the response. Yes, you are correct that E-H has some 9x15 minilite wheels. They look like a very nice pair.
We know the 8x15 wheel for Porsche application has been reproduced and is available. I have also heard that reproduction 9x15 minilites are on the way soon. Can anyone confirm this?
I would like to configure the rear flare on the ST project like the 1972 Kremer ST driven by Fitzpatrick: w-i-d-e. My thought is that the 10x15 minilite will fill out the wheel wells nicely for the "almost-RSR" effect that drew comment from the factory race department folks.
I know there are quite a few of these sitting around out there and no one should be racing on 35 year old so-so quality magnesium castings with the modern sticky tires people are using, so give 'em up, please!
OliveR, have you seen a pair of minilite 10x15s recently?
Thanks to all for any help.
Early 911S Registry
Looking for engine 960 168
Looking for gear box 103 165
Tom,
I can not help you find the 10x15's but I do like the car you are building. Here are a few pics of the original, hope you enjoy.
Regards,
Bob Aines
Bob;
Thank you for posting the detail photos of the Kremer car driven by John Fitzpatrick.
Of all the ST rear flare configurations, that car has the shape that looks best to me. I suppose the width of the ST flares grew in synch with tire technology - a trend that continued through the end of the 70s.
Do you happen to have any more shots of:
A. the interior (looks like a Recaro ST seat with smooth bolsters and waffle inserts) and
B. the engine (suppose it is twin plug Marelli with high butterfly).
Thanks again,
Tom
Early 911S Registry
Looking for engine 960 168
Looking for gear box 103 165
Tom,
Here are a few more, if you want more send me a PM with your address, I have over 100 shots of this car when it was recently at Moorespeed for service.
Bob
Bob,nice pics!!!
Have seen pics(page 15 of Starkey's book) of this ST kremer with specifics front flares(rectangular flares)
#rennfrog
thought briana on pelican had a pair for sale. don't know if they're still available. happy hunting.
Bill G.
1968 911 Ossi Blue coupe...full restoration in process
Done: Engine; transmission; suspension; gauges; wheels; rust repair & primer; brakes; paint
In progress: electrical; the tedious, endless, horrible fastener sorting/plating
EarlyS #718 | RGruppe #437
Bill,
I ran down your lead. Thanks for the tip.
I checked the thread: sold by Briana and the buyer has in turn sold...
Still looking.
Tom
Early 911S Registry
Looking for engine 960 168
Looking for gear box 103 165