WANTED: PAIR OF 7"X15" fuchs

[mycarrera2.7rs]

I am looking for a pair of 7"x15" fuchs for 911 wheels in undamaged, unrepaired condition, for refinishing,
thank you
JP

[Eric911S]

Hello: What type of 7x15 Fuchs? Thanks, Eric

[mycarrera2.7rs]

the 5 lug for 911 model

[Alan.uk]

Hi,

What Eric is asking is what "5 lug 911 7x15 wheel" as there are several different types. I guess you are not after the 7 x 15 R rim, so the next question is how correct do the wheels have to be. The other types are all variations on the same theme and are basically the same. If you after correct 7 x 15 for an RS these are more expensive than the later style 7x15s.

HTH

Alan

[mycarrera2.7rs]

Ah, ok, not R type, would have mentioned that, I am ok with just a pair regular old 7"x15" wheels, must be factory fuchs of course, no after market ones, but they don't have to be dated, I believe they were available till 1989 on the 911s Carreras,
so a pair of those would work fine, it is for my 1974 Carrera that is running on 16 inch wheels, I already have the correct 8" x15" wheels for the rear, just need the 7"s before I send them to Weidman for the RSR look.Thanks

[Eric911S]

Hello: Since you don't need the 7R wheels which I have. Next is do you need the flat edge or curved edge? I should have both of those as well. Look at your 8x15 to see what you have on those. Thanks, Eric

[Mr9146]

Why haven't you asked me for these?

[91167coupe]

Just courious, what is the difference in the two types of edges? Do you have pictures? In which year do the two different edges appear?

I thought it were just two(three) types, the one with big hole for new cap(in both silver spoke and black spoke finnish) and the old one for three clip cap(silver spoke finnish)?

Kjell T - Oslo