73 RSR oil cooler help!

[Mike_Moore]

Anybody have a better picture than this, of the modification to the front panel to allow air to circulate behind the bumper mounted oil cooler on the 1973 RSR (this looks a 74) Want to fabricate this part but unsure of the correct shape. Anybody already supplying the panel perhaps? Your help greatly appreciated!

Checked the obvious places, Armando and so on.

[mrg3.6]

See http://www.elephantracing.com/oilhan...lerducting.htm

Martin
911SC 3.6

[Mike_Moore]

Martin, thanks a bunch for that, looks perfect!

[richemj]

You can also cut out the battery boxes and build an airbox that channels the air from the cooler through the prior box openings. Thermostat-controlled exhaust draw-thru fans would be great too, especially in warm climates or high-traffic. Don't have to cut the hood as in the Elephant example above... preserving the original lines.

Here is a link to a similar settup for a '73 RS 3.6TT...

http://forums.pelicanparts.com/showt...pbait73&page=2

Still in rough mock-up...

[mike curnow]

Mike

I have what I think is an origional 1973 RSR panel that I am going to put on my car. If you need more pictures or dimensions for the panel, or any other areas of an origional 1973 RSR give me a yell.

Mike

Anybody have a better picture than this, of the modification to the front panel to allow air to circulate behind the bumper mounted oil cooler on the 1973 RSR (this looks a 74) Want to fabricate this part but unsure of the correct shape. Anybody already supplying the panel perhaps? Your help greatly appreciated!

Checked the obvious places, Armando and so on.