68 Sport seat base: picture help needed

[preS]

I have searched the board but I can't see the details that have my interst.

I need some detailed pictures of the 1968 tilt mechanismen which were used for the 68 Recaro Sport seats. Anyone have one laying around and willing to take some good close up pictures for me?

Please contact me if you can help me out.

Richard

[Soterik]

Richard,

Nothing handy, but one is on it's way to me right now....

Eric

[sithot]

Here's a base from a '67 which has no latch. The 3rd one is a double locker tilt base.

Tom

[preS]

Thanks so far. There are three areas that I would like to get good pictures off:

a. where the upper hinge is welded to the long bar (it's position to each other). Is the hinge in the middle or a little off, how far from the end (1/2"?)
b. picture from above showing the lower and upper bases to each other. How are they centered? In the middle or a little off?
c. I would like to get dimensions of the upper so a picture w/ 2 rulers next to it (or two pictures ) would be very helpful.

FYI thanks to Dr911E do I have an original lower frame and I need puictures to make the upper.

Richard

[Allen Henderson]

Thanks so far. There are three areas that I would like to get good pictures off:

a. where the upper hinge is welded to the long bar (it's position to each other). Is the hinge in the middle or a little off, how far from the end (1/2"?)
b. picture from above showing the lower and upper bases to each other. How are they centered? In the middle or a little off?
c. I would like to get dimensions of the upper so a picture w/ 2 rulers next to it (or two pictures ) would be very helpful.

FYI thanks to Dr911E do I have an original lower frame and I need puictures to make the upper.

Richard

Richard,

Here is some detail that I think you already have from me.

-Allen-

[preS]

Thanks Allen, I didn't have these yet. Would it be possible to post some pictures from the opposite site (front of the hinge that is) as well? And one taken from looking down w/ the mechanism closed.

Richard

[raynald]

Hello Richard
I hope this can help You, I have only one for sale !


Raynald

[preS]

Raynald I have send you a PM.

BTW still need some pictures as requested above.

RIchard