The Last of the stuff - MFI, Aftermarket Oil Cooler

[kgrizard]

Here's the last of the stuff - again, buyer pays shipping.

2.2E MFI setup (Pump, Throttle bodies, stacks, hardlines, linkages, cross-bar). Pump is free but has been sitting. I would assume that both the pump and throttle bodies need to be refreshed. - Asking $750 for the lot.

Set of case through bolts, nuts & washers. - Asking $15 (No pic).

Earls 25 row oil cooler, P/N 42512, unused but a bit scarred up from my aborted attempt to install. 13" x 7 3/4" with -12 fittings. Mocal thermostat, unused like above p/n OT2 with -12 fittings. Pair of 30mm x AN-12 adaptors. Cooler and thermostat are available from BAT for $166 and $116, respectively. If I remember right, the adaptors run about $30 apiece. Asking $250 for the package.

Questions are welcome, thanks for looking.

Kevin

Attachment 45699

Attachment 45700

Attachment 45701

Attachment 45702

Attachment 45703

[Bert]

Hello Kevin,

I will take the MFI stuff as described below.

I will send you an e-mail.

Thanks,

Bert



2.2E MFI setup (Pump, Throttle bodies, stacks, hardlines, linkages, cross-bar). Pump is free but has been sitting. I would assume that both the pump and throttle bodies need to be refreshed. - Asking $750 for the lot.

[orange911]

Definitely want MFI if first offer drops out.

[kgrizard]

Price adjustment before posting on Pelican / eBay:

MFI system has been sold.

Oil cooler and thermostat - now asking for $200

Thanks