Need the lower decal, or a complete set (-'71). It's the lower right emblem that looks like a dripping faucet.
Need the lower decal, or a complete set (-'71). It's the lower right emblem that looks like a dripping faucet.
Bill G.
1968 911 Ossi Blue coupe...full restoration in process
Done: Engine; transmission; suspension; gauges; wheels; rust repair & primer; brakes; paint
In progress: electrical; the tedious, endless, horrible fastener sorting/plating
EarlyS #718 | RGruppe #437
Bill, sorry I cannot help you, but it will be interesting to see if anyone comes up with an OE style foil sticker. I have seen repops, but they are not foil. I would like to replace them on my silver car since they are less than perfect.
Scott H.
1969 Coupe LtWt
1973.5 911T
I've got a couple of early clamshells with the decals on them.
PM me with your email if interested.
Tom Butler
1973 RSR Clone
1970 911E
914-6 GT Clone in Progress
You can get the right foil ones from Porsche--just not the pre-72 ones. I got a set of the 72- ones and they look right.Originally Posted by t6dpilot
Bill G.
1968 911 Ossi Blue coupe...full restoration in process
Done: Engine; transmission; suspension; gauges; wheels; rust repair & primer; brakes; paint
In progress: electrical; the tedious, endless, horrible fastener sorting/plating
EarlyS #718 | RGruppe #437
Thanks, Tom. If you can carefully pull a few decals off, I'd be interested. With 72- decals in hand, I guess I've decided I really don't care too much about being correct anymore.Originally Posted by tom1394racing
Bill G.
1968 911 Ossi Blue coupe...full restoration in process
Done: Engine; transmission; suspension; gauges; wheels; rust repair & primer; brakes; paint
In progress: electrical; the tedious, endless, horrible fastener sorting/plating
EarlyS #718 | RGruppe #437
If you like, I can send you a high res scan. I have a set that I have not put on yet. I want them, but a scan will be very easy at this point in ttime.
let me know
-----
71 911E RS Clone (Analog)
88 928 S4 (V8 Trans Axle)
99 996 (Daily Beater)
Early S Registry # 1278
drwhosc, thank you for the offer. I'm guessing it would not be worth the expense to get a single set made. Are they still available somewhere?
Bill G.
1968 911 Ossi Blue coupe...full restoration in process
Done: Engine; transmission; suspension; gauges; wheels; rust repair & primer; brakes; paint
In progress: electrical; the tedious, endless, horrible fastener sorting/plating
EarlyS #718 | RGruppe #437
Still available from Stoddard for around $45 a set - OEM.
Really? I only saw the ones that say "wash" and "wipe" with the .01 suffix. Stoddard has the earlier .00 emblems with the symbols? My understanding was that they have been superseded. I guess I'll have to call again.
Bill G.
1968 911 Ossi Blue coupe...full restoration in process
Done: Engine; transmission; suspension; gauges; wheels; rust repair & primer; brakes; paint
In progress: electrical; the tedious, endless, horrible fastener sorting/plating
EarlyS #718 | RGruppe #437