I am looking for the door latch recievers that mount on the lock post with 2 screws. I need left and right. Prefer nice condition. Please email dierect to >eurotech@together.net< I believe 68-89 are the same.
I am looking for the door latch recievers that mount on the lock post with 2 screws. I need left and right. Prefer nice condition. Please email dierect to >eurotech@together.net< I believe 68-89 are the same.
I don't know if this helps Rick but eaby seller Maria Habeck in Germany has these new ones available for 44 euros each:
http://cgi.ebay.com/ws/eBayISAPI.dll...m=360109427342
I have bought many parts from her over the years & have always found her great to deal with.
Andy
Early 911S Reg #753
R Gruppe #105
Andy, Here's the rub.
I am restoring 3 73 RS's. Stoddard also sells repro's. The people who are remanufacturing these are plating these in Yellow cad. The proper color is zinc.(silver) So I want to get some nice cores so I can take them apart and replate them in the proper color, and then put them back together. You can buy these from Porsche by part number, but they come through black.
Does this woman in Germany sell other Porsche items?
I know what you mean Rick - I bought some from Porsche last year for one of my cars & was disappointed to find when they arrived that they had a (cheap-looking) black finish.
The German ebay seller in my link above has an extensive range of Porsche parts - but many of them are repro items.
Andy
Early 911S Reg #753
R Gruppe #105
I have a pair the metal is good clean not rusty and plastic is nice on the long curve but at the top the plastic is disintegrating...is this restorable?
2:23pm correction the long curve is at the top so the bottom is not well seen but for an RS you have to use
perfect ones...
Richard aka le Zookeeper
early reg #1128
comparing it to a good one I see those above wont do....I have yet to take apart another 67 where parts are quite excellent.
I will check...assuming 67 latches will do I believe both are present and likely good (low mileage Canadian rustbucket)
Richard
OOPS! sorry for d double post
Richard aka le Zookeeper
early reg #1128
Rick, These are off my 72 T.. Let me know if they are what you are looking for.. seem to be in pretty good shape, One still attached to the latch panel.. Bob
Bob Petitt
1967 911S Coupe 307653S, my barn find - 55,000 miles Looking for engine #961269 and trans 901/02 #104337
1971 911T Coupe 9111120264, my first 911 back in my garage
1972 BMW 2002, my first car - 350,000 miles and counting
1972 911T Coupe 9112100970, Sporto, parted it out..
1983 BMW 320i, my everyday car - 138,000 miles and gutless
2005 Subaru Outback, the daily driver - boring
2006 Volvo XC90,
Registry Membership #202
The flash washed out the color. Here's what they really look like.. Bob
Bob Petitt
1967 911S Coupe 307653S, my barn find - 55,000 miles Looking for engine #961269 and trans 901/02 #104337
1971 911T Coupe 9111120264, my first 911 back in my garage
1972 BMW 2002, my first car - 350,000 miles and counting
1972 911T Coupe 9112100970, Sporto, parted it out..
1983 BMW 320i, my everyday car - 138,000 miles and gutless
2005 Subaru Outback, the daily driver - boring
2006 Volvo XC90,
Registry Membership #202
Does anyone have a source for replacement for the Nylon and plastic spacers to rebuild these. Most of the ones I have, the plastic has turned to the consistency of dried soap and flaked away.
Bob
Early S Reg #370
The plastic is not available. The spacers that go between the reciever itself and the lock post are. I guess I'll need to buy new ones, take them apart, replate them the right color, and then put them back together. As Bob said, the plastic tends to yellow, and then fall apart.
Posting Permissions
Reply With Quote