Wtb seat rail bolts

[denson]

If anyone has an anodized set of seat rails bolts, please email me at jtl356@wpmginc.com. These are for a 73 car.

Thanks,

John

[andyjboy]

They wouldn't have been anodized as they were steel - probably bright zinc plated.

[Zithlord]

I have some correct bolts, they hold the rails to the floor plates. The correct type is low head yellow zink, the same used to hold the floor plates, that the rails attach to, to the floor, on the outboard side of the seat. They are 10,9 steel. I had them made at a factory in the UK. Those that hold the rails to the seats are simialer but self counter sunk, with a special tip, and with a different size allen head. I had to have 1000 pcs made.

Which exact bolts do you need?

John

[denson]

I need the bolts that attach the seat sliders to the floorboards. They are yellow zinc and think they are 6x15 or 6x20. I believe 16 are used for all four sliders.

Thanks for the help everyone!