spacer for racemark "donohue" steering wheel

[karlusmagnus]

I have a racemark "Mark Donohue" wheel, and i was looking for a spacer, so that i could see the gauges a little better.
Here is my wheel

I see that JWestEng is selling a spacer for Momo wheels, but the bolt pattern on my old Momo was different to that of the Racemark. Does anyone know of the spacer sold by J West Eng would work for a racemark? It states Momo, and nothing of other wheels on the site.
This is the spacer I speak of
http://www.jwesteng.com/porsche/steering.htm

I posted over on Pelican as well.
Thanks for info,

Karl

[boba]

Hi Karl,

We have an 80mm and 60mm hub. Would the 80 be tall enough?

Momo and R-5 bolt pattern drilled and taped.

Bob

[karlusmagnus]

Thanks Bob. I'll have to measure and see. I'll let you know.

KO.

[Jens]

Hey Karl:

I think the Momo bolt circle is 70mm and the Racemark is 75mm (the same as Nardi). Look for a Nardi to Momo spacer/adapter on ebay. $30 or so.

They're easy enough to make, so a local machine shop shouldn't charge much. I've made my own by just buying a 1 inch lenght of aluminum and drilling and tapping the right sized holes. Then paint it black. Cheeeep!