Window seals missing on my car (1972 Targa)

[JM9090]

Rebuilding my doors, it looks like the fuzzy seals on the outer side for the windows are missing. On the inner side, there is the U-shape seal (#15) and on the outer side, the window scraper (#11)


It look likes I am missing the seal for the vent window (#12) and the fuzzy seal (13).
There is no notes in the parts catalogue on the model year, so I suppose I would need them for my 1972.

Can somebody share knowledge or pictures on how to install?
Is the seal for the vent window just squeezed between the doorskin and the frame, or does it need to be glued?
Is the fuzzy seal just click on into holes in the door? Or do yo need to glue it? Do you need to remove the window to install it?

[classic]

Yes, the number 12 seal in your diagram that fits between the vent window and trim need to be sandwiched in between the two as you fit the trim. No glue needed.

Number 13, just clicks into place. I’m doubtful if you could get the window low enough to fit it without removal, although I’ve never tried.

[JM9090]

Tony, thxs for your reply

[John912]

Let us know if you find an authentic replacement for #15, not sure if LWB is same as SWB, but #15 for SWB is unobtanium. #11 is readily available and simply slides into the chrome door top from one end -- I saw a video where someone spent a half hour prying it in an eighth inch at a time!

[JM9090]

Thxs John for your reply.
It looks indeed that everywhere you look, the 15 is replaced with a newer version (with a rubber strip covring the upholstery). I just ordered it, but most likely I will cut the strip away in order to have it lookin more to the original.