torsion tube question

[freezing14]

ok i have change the dog leg , inside and out ,, , i have welded the torsion tube to the new frame pieces , but on the outer piece , is it welded to the outside part , i would guess yes , but i just want to be just before doing a bad mistake

right here

[MarkS]

Your a good guesser it is welded 360 degree's.

[robmog]

hope this helps

[freezing14]

so there are no piece of tube sticking out , its welded flush,, humm interesting

thanks

[MarkS]

so there are no piece of tube sticking out , its welded flush,, humm interesting

thanks

The tube DOES stick out aprox 1/4" just like your pic show's, you are ready to weld, romog,s pic angle just dosen't show it.

[robmog]

better picture angle