WTB: ‘65-66 Solex cross bars and linkages

[rcnagel]

I currently have the cross bar for between my Solex carbs, but I need the three linkage bars(two short and one long). I've reproduced similar stuff in the past, but I'm wondering how many people out there are interested in purchasing reproduction rod sets and cross bars? These usually get lost.

If I can get more than five and peferably 10 people interest, I would go into production.

Let me know

[lars1965]

Hello Casey

+ 1 for me

lars 911 #303043

[Auto*Legends]

I'm in too

[rcnagel]

So I found the guy that makes the Weber cross bars, the pair of short links are the same as the Weber ones, so I can get those, and long link to the back of the engine is unique but easy to have machined.

I'll pursue this a bit further. I've gotten about a quantity of six from posts and PM's. Let me know if there is still interest out there.

[Mikael Berg]

Hi,
I are in for 2.
Micke

[302340]

Hello Casey,

Did you ever decided to make the cross bar linkage and sets? I would also be interested in a set. Thanks!

Lee
302340

[rcnagel]

Hey guys,

A quick update since a few of you have emailed me and PM'd me on status. I've worked with a machinist and a tube fabricators who couldn't do it exactly as a turn key. I'm back to reverse engineering it myself. I'm having some custom tooling made that should be done this week to test out. I'm pretty hopefull that I can post some positive progress in the next two weeks. All the tabs are drawn in CAD and ready to water jet. Since these cars have gone up so much in value, I'm trying to balance making it look exact at a price people wont choke over.

I've got about a dozen sets of linkages completed. The cross bar hopefully will be available in August.

I'll keep in touch.

Casey