WTB complete soft window complete frame kit

[GIL356]

Hello members,
I have a 3.2 Targa that I want to back-date into a Softie to make a daily; I'm looking for the complete soft window frame and also the window (bad condition ok) ...
I know that I can buy it new but 4400$ seems very expensive for that.
Thanks in advance for answers

[freezing14]

hi there i am the one guy who makes the kit ,, all the kit you see sold anywhere else are made by me

and since you deal with the guy who makes it , there is not mark up

the kit is 1800$ cad for all the hardware and 2300cad for hardware plus window

the kit includes
1 targa bow
2 rear half bows
2 side spacers
1 pair of handles
1 pair of coupler
the 3 rear special bolt
and all the hardware to put it in

and 1 window , if you take the one with

in your case you need the 3 rear tabs ( they are 50$ for all 3 ) as your car is not a SWB

color instruction manual

all the parts are interchangeable with OEM parts

item not included:
the seal ( as it is available from a lot of other vendors)
any deco molding
covers etc

plus shipping to any where in the world

[WM711]

how much for LWB? Thanks-Bill

[Jerry L]

Same kit, same glass Gill is also a LWB

Yves is the man, I was about to pull the trigger for his kit to take my 67 912 euro targa back as created and I found a rotten 68 swt in Fla with all the gear.

Regards

Edit:
Yves I will be emailing you for the "special bolts for the lower bow, mine are flat washers welded to set screws :-(

[Soterik]

how much for LWB? Thanks-Bill

Bill,

I have an NOS LWB targa headliner.... I'll email...

[freezing14]

for a LWB , the kit is 1850 ( because you need the 3 rear tabs ) or 2350 ( read the first post) and you have to install the captive nut in the hole of the targa bar , its funny as porsche kept the exact same stamping up almost up to the last air cool targa the only thing they did not do is to put the captive nut , even the side have the hole to connect the inner and outer frame ,