WTB: Metal air intake horns (set of 6) for 2.2E MFI

[MountainRoads]

I replaced the stock plastic air horns on 1971 E with Weber carb air horns when I reactivated the MFI cold-start, since the plastics can potentially catch fire and melt if extra fuel is hanging around. Something I prefer to avoid

The carb horns are a couple of mm too wide, which reults in a minor reduction step at the top of the throttle bodies. I've been told that this would not be noticable while driving, but indeed measurable by dynamometer. Personally, I think the metal horns look cooler, anyway.

I passed on a set of 2.2 'S' horns, because they are also a couple of mm too wide. Not sure if 2.0 'S' horns would be the correct diameter. Thanks in advance.

- MR

[kllr901]

http://www.piercemanifolds.com/

Try these guys.

[MountainRoads]

http://www.piercemanifolds.com/

Try these guys.

Cool. Thx. I will check them out.

- MR