LWB Horn Grille Seal Details?

[teenchy]

I'm about to get my horn grilles back from the rechromer and would like details as to how to correctly reattach them to the car. These are the standard, 2-screw LWB grilles, not TTG fog lamp grilles. Specifically, what are the correct mounting screws and clips, and how does the rubber seal attach to the back of each grille?

When I took the grilles off my car I noticed that the original rubber seal (sort of blue-gray) ran across the top edge of each grille but had been cut at a bevel at either end. The replacement seals from Stoddard (black) are not beveled.

Apologies up front for (1) not being able to find this in a search (2) not photographing the parts when I removed them from my car.

TIA

[70SATMan]

They are just glued to the grill with trim adhesive.

I'd just cut the small bevels on the seal after the glue has dried.

By the way, no difference in the seals between the full grill and the cut grills.

[teenchy]

Thanks for that.

Again in my haste I neglected to take a photo of the grilles when I removed them, so where exactly does the seal glue on: in the indentation above the uppermost grille bar on atop the grille itself? A photo would help.

[70SATMan]

Thanks for that.

Again in my haste I neglected to take a photo of the grilles when I removed them, so where exactly does the seal glue on: in the indentation above the uppermost grille bar on atop the grille itself? A photo would help.

I have some other pics to take tonight, so I will take pictures of a set of factory original grills I have that still have the seals in place.

[teenchy]

I have some other pics to take tonight, so I will take pictures of a set of factory original grills I have that still have the seals in place.

Looking forward to the pics.

[70SATMan]

Looking forward to the pics.

We had a bit of an extended family emergency. Daughter's SO was hit by a truck that very eve while commuting home by bicycle. Just brought him home from the Trauma Center last night to recoup at our house. Been a rough week....Going to be a rough 3-6 months for him. One lucky young SOB though considering..

I'll see if I can't get to that this afternoon once I get home from work. I also promised a PP thread pics of my "City Light" H1s.