how much sepco 201 oil needed for a 915 gear box when doing an oil change ?
just have never had to do a change before
how much sepco 201 oil needed for a 915 gear box when doing an oil change ?
just have never had to do a change before
John Gausden
Auckland, New Zealand
(shipping carson,CA)
Early911nz.org
ST-Classic.com
ST-Classic Facebook
"Funding my obsession one nut at a time"
not sure the exact amount.. i just get the gallon bottles. you'll have a bit left over, but you'll have enough for sure.. you can save the extra to use in your next one (but it wont be enough for two so you'll have to get another gallon next time)
then again i have a 901... but i wouldnt think it would be too far off..
Harry Hoffman
1968 912 #3656, burgundy red 'Fritz'. Some mods..
912 Registry charter member #912R0195-C
Early 911S Registry Member #2070
356 Registry Member #36691
http://hoffman912.blogspot.com/
Ther are no dumb questions.
You need about 3 quarts.
My story on how to do it is here: http://members.rennlist.com/harryd/Trannyoil-Change.htm
Harry
Member #789
1970 VW Sunroof Kombi Bus - "The Magic Bus"
1973.5 911T Targa for fun - "Smokey"
2009 MB C300
+1 on the gallon container. I got one of those bottle top pumps with tubing attached to it. Made the job very easy (and somewhat clean). I ended with a little left over.
Kent
E911SR & RGRUPPE
'65 911 "The Ol' Gal" (long gone)
'73 S Coupe #306
Harry Hoffman
1968 912 #3656, burgundy red 'Fritz'. Some mods..
912 Registry charter member #912R0195-C
Early 911S Registry Member #2070
356 Registry Member #36691
http://hoffman912.blogspot.com/
These volumes are American Measure not Imperial. i.e. 32 ounce quarts and 128 ounce gallons as opposed to 40 ounce and 160 ounce as used to be standard in the Empire.
johnt
3 quarts = 2.83905884 liters , so 1 US gallon = 3.78541178 liters or a std 4 ltr pack , so cheers guys for the details and link
John Gausden
Auckland, New Zealand
(shipping carson,CA)
Early911nz.org
ST-Classic.com
ST-Classic Facebook
"Funding my obsession one nut at a time"