'66-'67 911 Passenger Side Fender: Delivery @ Hershey

[mshaver51]

This was the passenger side fender that came with my project. Once we blasted it, it's easy to see that it was very rough with rust in the predictable places.

As the photos show, there is bondo behind the headlight bucket, suggesting a hit or rust in front of the wheelwell.

Also, the rear/lower/tail is pretty much shot, as shown.

After a buyer inquiry, I noticed that the turn signal bucket is set up for a 2-hole horn grill, rather than 4-hole. The lower rear edge of the turn signal bucket needs new steel, but the headlight bucket is good and the area between appears strong. The inner mounting edge is pretty much gone, and a feeble attempt had been made to re-weld it.

I'll section it, if someone is interested in a part of it. $50 plus shipping seems fair for a section. $60 for the headlight bucket. $100 for the whole thing. If my pricing is off, feel free to educate me.

I'll deliver it to Hershey if someone wants it, but I'm not sure I'll have room unless someone buys it.

Thanks for looking.

[mshaver51]

Bump to top

[mshaver51]

additional photos of headlight/turn signal area