Duck Tail script placement & measurements?

[QWKENF-911]

I need the correct placement for the PORSCHE script for the RS ducktail..can someone please provide me with this?? I used to have the
RS holy grail book but unfortunately sold it and remember there's a page that had this info.

[andyjboy]

Here's the info (sorry about the poor quality):

[QWKENF-911]

Thank you very much sir...

[QWKENF-911]

Okay I've tried to place the PORSCHE script on my ducktail but need to know is the measurement of 25mm from the edge of ducktail to letters consistent
on every letter except the center "S" ( which is 36mm )?? Also any tips to properly install without ruinning it??? I will attempt but will back off if its not doable
and have a "pro" do it. Anybody???

[mobius911]

I would use 25 at both ends and then the "S" should fall at 36mm. I think they included the middle measurement just so the installer has another reference to ensure the decal is straight. The decklid bottom edge curves continuously so there is no way that every letter but the "S" can be at 25mm.

[advtracing]

For the rs or rsr hi up on the back side of the tail what is the measurment there please

[andyjboy]

Here you go John:

[advtracing]

thats great , now last one ....side setup

[mcampuzano]

. .