"R" type window conversion

[Xavier PJB]

Dear all,
I am about to convert my power windows into a leather stripe R type style. Anyone done that before ?
I have got the stripes and the little metal fingers.
How do I attach/fix the leather stripe to the window ?
Help needed.
Cheers
Xavier

[JimmyT]

Number Qty Description
901.542.410.60 2 Lifting rail
999.190.118.30 4 Pop rivet, GTO-K 44 575
901.531.751.60 2 Lifting belt
901.531.752.60 2 Cover plate
900.019.012.02 2 Oval head, countersunk screw, AM 5X15 DIN 91-55 GAL ZN 8C
900.025.003.02 2 Washer, Flat, M05,3 DIN 125-ST
999.090.002.02 2 Hex nut, locking, Nylon Insert, M05 DIN 985-5S GAL ZN 8C

[Xavier PJB]

Thanks a lot. Here is the pic of the various steps I did today. I am pretty happy with the result. I had several "surprises", I could not use the leather strap to open the door, cause of the mecanism which have been upgraded to support the previous RS92 strap-I decided to reuse but swapping the strap to leather.
I also made a small piece of 1mm aluminium to strengten the edge of the window leather belt.

[Xavier PJB]

Here is the final result

[jameshtaylor]

http://www.early911sregistry.org/for...r+window+strap

[Xavier PJB]

Well, the regular windows are too heavy for the leather belt :-(, any tips to find R macrolon window in 5mm ?
Thanks.