Three point seatbelt for 1966 911

[jaldeguer]

Kardex of my '66 car states it has a three point seat belt. Would someone be so kind to post photos of this factory option preferably one thats mounted onto the car. Any info would be appreciated.

Thanks.

Jay

[304065]

Here you go. I have the same option (these are not my car). You sure don't want to get into an accident with these.

[jaldeguer]

The photos are a great help. Yes I've read how many have changed to safer set ups. Question: In photo no. 2, there's a strap that goes on top of the seat; is this the part that latches on the top of the wheel well. (photo no. 1)?

What set up do you have now?

Thanks!

Jay

[304065]

Yes, the shoulder harness strap basically is the tail of the strap from the driver side, it goes back to the wheelwell post.

I am using a set from Bill Rich at Vintage Seat Belts that goes from the B-pillar down to a pair of modern hooks on the original mounts. For "Driving" purposes I'm going to use 911R seats with headrests with a belt mount integrated into the seat bracket like Ed Mayo did.

I recently scored a set of original 356 belts and will work these into shape for show, they need a lot of work. I have been searching for a very long time for these.

[jaldeguer]

This should be interesting. Hope to see photos when you're done.

I recently scored a set of original 356 belts and will work these into shape for show, they need a lot of work. I have been searching for a very long time for these.

Now for my set up, would you say that getting belts at Vintage Seats would be my best alternative for the moment?

[Bobs 67S]

Hi guys, did a modification to use floor mounts for the lap belts. Re-webed using the period hardware. and leather for the belt end adjustments - the plastic was toast.

[Bobs 67S]

The rest of the photos: